Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering youāll be able to ask questions, join discussions, follow topics youāre interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 9, 2026
Not in the def _body(self) code that has return bytearray(), just in the usual places to get the sensors added and message processed. I've just bee...
Back in January, I did something similar, in effect getting the data from these bytes. Here are the notes I made at the time: data_offset + 16 = 5da...
@derek-m - there were some tab/indent errors, which crashed it, which I corrected and it ran, but nothing showing up for outdoor_temperature as it nee...
@derek-m - I'll try running it as is, if it crashes I'll uncomment/comment it as you suggest.
Just a thought - a c3 device ie a heat pump doesn't know about indoor humidity, so it can't put humidity data in the message. If any data does appear,...
Yes and no, they are in that list, but as far as I can see the selection drop-down list contents come from the very similar list in midea_devices.py (...
None of the byte_05 entities, which have been running overnight, have collected any data, either in HA itself or in the logs. It has the very li...
Sorry, forgot to answer this. This is the current midea_devices.py list for C3 devices: 0xC3: { "name": "Heat Pump Wi-Fi Controller", ...
I think that is a very useful objective. We're pretty sure it is in the 04/04 message, if we can then make it appear in the 03/01 message, then we hav...
@derek-m - I've also added this to the right place at the end of c3/message.py so we test for multiple body types in one pass: self._bod...
@derek-m - that's very interesting, and armed with it, I had another look in HA and it turns out the extra sensors are visible in Midea AC LAN > co...
If UI means the wired controller as I think it does, I think you are right, it is the master (so any and everything else is/are slaves). But I think t...
SPONSORS
Degrees of Separation
Latest Posts
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 1 hour ago
-
RE: Vaillant Aurotherm - Heater Wire Position
I have a recent Pro model. It has a condensate drain at...
By Batpred , 1 hour ago
-
RE: Adventures in heat loss calculations
At this point its probably worth pointing out, for futu...
By JamesPa , 3 hours ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 6 hours ago
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay @jamespa I've managed to get some nice re...
By Rob of York , 1 day ago
-
RE: 7kW EV Charger Options Advice
Doh, not sure that I was thinking straight there, less ...
By Rusty , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
Iām really liking reading through this thread and the r...
By Judith , 2 days ago
-
Thank you @trebor12345
By rgabor , 2 days ago
-
Panasonic Free Multi Z and Etherea Internal units.
My prospective installers have suggested the Panasonic ...
By Toodles , 2 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Great. You just need to find a way of cranking up your...
By JamesPa , 2 days ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
We had two heat pumps installed without Govt funding. H...
By Rob of York , 2 days ago
-
My Adapt is finally installed and running! Almost a yea...
By tomasmcguinness , 3 days ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 5 days ago
SPONSORS
