Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering youāll be able to ask questions, join discussions, follow topics youāre interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 9, 2026
I'm pretty sure both Freedom and Homely use a wired modbus approach, making a physical connection to the H1/H2 connections in the wired controller. ...
@derek-m - don't forget that I have already tried something like this, and we have previously discussed it. My code is still at the end of c3/message....
I (and a few others with similar questions) have posted questions on Github for both developers but no recent relevant responses at all. Both versions...
It still was a conundrum when I wrote the original post, but now we may be getting nearer to a solution, which was the whole point of writing the post...
Done (by DM) Might they be arbitrary, then once set, they can subsequently be used? There certainly doesn't seem to be any pattern to them. Fro...
I think you are right, my observations however were more that it doesn't know about DST, and so doesn't automatically shift its clock in October and M...
@derek-m - I think you may have found something important: class MessageNewProtocolQuery(MessageACBase): def __init__(self, device_protocol_ver...
I'm sure that is right. Presumably your recent large extension is well insulated, and you can enjoy the benefits of that. Inside. That made it it...
@batalto - that all makes sense. It's also a very good example of the problems we have to deal with in real world data, nothing ever stays the same!
@batalto - interesting. Here is my reading of the numbers. Units: we are looking at energy consumption and as we are looking at energy, we use kWh (...
@derek-m - that is the from x import y form of importing. I realised we can view HA files on github (and get the extra tools that provides). The above...
Quite a lot of the midea_ac_lan files import from HA. The import lines at the top of the files (sorry if I'me teaching GM's to suck eggs) do the impor...
- 27 Forums
- 2,762 Topics
- 65 K Posts
- 1,638 Online
- 7,168 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 1 hour ago
-
RE: Vaillant Aurotherm - Heater Wire Position
I have a recent Pro model. It has a condensate drain at...
By Batpred , 2 hours ago
-
RE: Adventures in heat loss calculations
At this point its probably worth pointing out, for futu...
By JamesPa , 4 hours ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 7 hours ago
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay @jamespa I've managed to get some nice re...
By Rob of York , 1 day ago
-
RE: 7kW EV Charger Options Advice
Doh, not sure that I was thinking straight there, less ...
By Rusty , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
Iām really liking reading through this thread and the r...
By Judith , 2 days ago
-
Thank you @trebor12345
By rgabor , 2 days ago
-
Panasonic Free Multi Z and Etherea Internal units.
My prospective installers have suggested the Panasonic ...
By Toodles , 2 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Great. You just need to find a way of cranking up your...
By JamesPa , 2 days ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
We had two heat pumps installed without Govt funding. H...
By Rob of York , 2 days ago
-
My Adapt is finally installed and running! Almost a yea...
By tomasmcguinness , 3 days ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 5 days ago



