Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering youāll be able to ask questions, join discussions, follow topics youāre interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 9, 2026
Thinking about it, I have already done this (when I tested the individual bytes above 21 ages ago). The results were: data_offset + 22 = 0 (fixed, s...
@derek-m - thanks, will give the bytes 22 and 21 tests a try tomorrow. On a general note, I think it might be worth continuing this in a new thread,...
Well spotted, I missed that. Done, and HA restarted, but unfortunately still get 'outdoor_temperature': 0: 2023-03-14 18:49:17.061 DEBUG (Heat Pump ...
I am sure you are right, but that begs the question of why '*18' in the other code above. Perhaps it is something to do with our old friend zero based...
@derek-m - decided to go straight to 25 ('return bytearray([0x00] * 25)'), no change in message length (or content): Message immediately before chan...
Rant starts! This really is a brilliant example of how irritating python is, and proof of the claim that it is easy to learn is bullshit. By all n...
They are exactly the same as before, with minor value changes for variables that change eg tank_actual_temperature: 2023-03-13 18:47:52.638 DEBUG (H...
I removed the code causing the error straight away, and the remaining code now functions normally as it did before. The code added and then removed is...
Part 5: Dealing with a Major Flaw Before we move on to getting Midea data, a short post to deal with a major flaw that affects both HA and Midea...
Not really, what you see above is what you get, no message body or string at all. I've seen this before. The code can either fail to load at all, ther...
I'm sure you are, the above post was just adding more documentation for me and any others - if there are any - who may be following this thread. ...
SPONSORS
Degrees of Separation
Latest Posts
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 55 minutes ago
-
RE: Vaillant Aurotherm - Heater Wire Position
I have a recent Pro model. It has a condensate drain at...
By Batpred , 1 hour ago
-
RE: Adventures in heat loss calculations
At this point its probably worth pointing out, for futu...
By JamesPa , 3 hours ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 6 hours ago
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay @jamespa I've managed to get some nice re...
By Rob of York , 1 day ago
-
RE: 7kW EV Charger Options Advice
Doh, not sure that I was thinking straight there, less ...
By Rusty , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
Iām really liking reading through this thread and the r...
By Judith , 2 days ago
-
Thank you @trebor12345
By rgabor , 2 days ago
-
Panasonic Free Multi Z and Etherea Internal units.
My prospective installers have suggested the Panasonic ...
By Toodles , 2 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Great. You just need to find a way of cranking up your...
By JamesPa , 2 days ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
We had two heat pumps installed without Govt funding. H...
By Rob of York , 2 days ago
-
My Adapt is finally installed and running! Almost a yea...
By tomasmcguinness , 3 days ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 5 days ago
SPONSORS
