Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Apr 12, 2026
@jamespa - Ideally we would leave it in WC mode 24/7 but it would be nice to have the room influence for solar gain etc, I'm not chasing 100% efficien...
@jamespa - Thanks, I hadn't considered the room influence. Seems like this is becoming more expensive and complicated by the day! My UFH manifold...
K@jamespa thanks for the advice. The plan is to get it all set up open loop 24/7 - will be nice to have the thermostats upstairs to fall back on thoug...
@ashp-bobba thanks, we are too far away from Kent unfortunately. Self balancing would be ideal, as much a trv's aren't ideal for heat pumps they are u...
I am thinking the same, I would prefer Vaillant as there is a lot more info out there regarding the arotherm, there controller and app seem much bette...
The FRV's you mention look good, I may have to invest in some of these to help balance the system. So if I go for set the buffer up in 2 port I would...
I have calculated the heat loss using heatpunk as 3kw, our neighbour who has the same house had a few calculations which came in around 3-3.5kw. We do...
- 27 Forums
- 2,745 Topics
- 64.5 K Posts
- 317 Online
- 7,149 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
@toodles I invested on Miele a pair of frodge frozor wh...
By AgentGeorge , 7 minutes ago
-
RE: Flushing system, cleaning and inhibitor
Flush and fill all complete. Octopus kindly gave us a...
By Old_Scientist , 18 minutes ago
-
RE: Wood burner with ASHP - direct air?
For what it's worth I installed a wood burner in this o...
By BlizzardGreen , 1 hour ago
-
@editor Thanks for your response and recommendations. ...
By DavidB , 8 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
I think I saw a diagram for an exhaust air dhw tank wit...
By JamesPa , 22 hours ago
-
RE: Indevolt Batteries UK Support & Info Thread
Thanks, however that's an answer to a subtly different ...
By JamesPa , 3 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles Such elegant symmetry. look at my lumpy bag of...
By Papahuhu , 4 days ago
-
RE: PV and battery long payback - sense check query
Quite probably not, but you can get a 32A relay and a S...
By JamesPa , 4 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s Look forward to making contact soon! Regards, To...
By Toodles , 4 days ago
-
I don't notice mine defrosting, and most of the time Im...
By JamesPa , 5 days ago
-
RE: Do I need to change the control unit when replacing my Ecodan Air Source Heat Pump
Kind of you, @calumm, but it was @f1p who did the heavy...
By Majordennisbloodnok , 5 days ago
-
RE: Electricity price predictions
2. As EV ownershp increases it'll certainly increase de...
By EtchedPixels , 6 days ago


