Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 26, 2026
Via the cloud and via the online, similar data is shown. So far, just doing its job. And if you can live with plastic surface ducting, y...
Very enlightening discussion. I know we will be a pain to the PV installers we will hire, but.. We are wondering what to look for panels consider...
Thanks for sharing this, it is clearly disappointing, BYD is exactly what I thought would be ideal... But better for Octopus to pull out than to sel...
Thanks for sharing. 🙂 To be honest, right now I have a much better sense of what matters. I believe that I have things ready in my...
@majordennisbloodnok You are causing a lot of confusion. Do not overthink this
If you would be minimally qualified to make these broad statements about electrics, you would have provided the image, the actual quote... As my sti...
😁Yes, the 90Amps capacity in total in an 8k inverter seemed unbelievable. To get that out of the system, a complex setup is needed. So th...
"KISS" applies. As the principle of "when in Rome, do it like the Romans do it". 😀 I had an EV charger put in by a qualified electrician. Di...
@majordennisbloodnok Thank you for raising it, major! The context of "no solar" is very relevant. A few things, KISS applies: ...
That's exactly what is expected, that voltage etc will vary. But how can the DNO keep it within specific quality parameters, unless they monitor it? ...
It seems that the electrically capable can go further on the G99 process. The G99 A3-1 and A3-2 form includes a checklist of safety aspects for the "s...
- 27 Forums
- 2,750 Topics
- 64.7 K Posts
- 1,205 Online
- 7,158 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 16 hours ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
Sooooo, what did we do in the end? We approached three ...
By Penval , 17 hours ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
D'oh - of course. I shouldn't post before my brain is f...
By Old_Scientist , 22 hours ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 24 hours ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 24 hours ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 1 day ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 2 days ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 2 days ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 2 days ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 3 days ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 4 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 4 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 4 days ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 5 days ago



