Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: May 17, 2026
@jamespa I doubt I would find those homely and similar good value for money. I just found my inverter can handle the octopus agile rate with some ...
With my dno, there's a portal with accounts etc and some "applications" like the ev charger are just a few clicks. Others you send docs like for exp...
Thank you. The way that framework splits between 1 and 2 is not clear, but from what I can tell, this hybrid solis is class 1 and 2. It h...
How does it work off grid without an oscillator?
It would be very useful if anyone could answer it! 😀 (By the way, your results are actually not visible when clicking on the link, you may hav...
Yes, you make a good point and beyond servers, engineers use whole platforms and open protocols, at least for common devices. So if their app stops wo...
Fair enough. I am not aware how this Solis (2in @transparent post) works internally, but one way to think about it is if the internal oscillator co...
Insurance helps and when adding high powered devices like EV chargers, PV panels and some inverters and heatpumps, the other circuits may need to be a...
Bu the way, my understanding is that arcing detection is not required for new circuits unless it is a shared use property? Or is it only for rental pr...
So an update on the Solis inverter settings and rcbo circuit protection. Have to say that the Solis European wide support has been solid. So to...
I will continue the discussion on the solis installation on the Fogstar battery thread
These techno geezers seem to have some learnings related to the Seplos firmware.
Latest Posts
-
RE: Debugging my legionella immersion heater
To conclude this story, I hadn't realised that immersio...
By Prunus , 2 hours ago
-
RE: Setback savings - fact or fiction?
You are right to be intrigued by it IMHO. SOFAIK it is...
By JamesPa , 6 hours ago
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
@swwils there is no logic to oversizing a heat pump. It...
By AgentGeorge , 8 hours ago
-
RE: Vaillant Sensocomfort Time
Thank youy for the pointer. I think I have managed to ...
By ispookie666 , 23 hours ago
-
RE: Forum updates, announcements & issues
I have been doing a lot of work on the site lately and ...
By Mars , 23 hours ago
-
@majordennisbloodnok good advice, thanks for that.
By David999 , 1 day ago
-
RE: My Grant R290 9kW Heat Pump Installation
I am following this thread with great interest and than...
By TaffontheTaff , 1 day ago
-
RE: Sizing an ASHP; Heat loss and kW
You can't measure heat loss with a website. But you ca...
By JamesPa , 2 days ago
-
RE: Estimating true heat loss from twelve months of consumption data
@ian33a — I have a sort of residual interest in this pr...
By cathodeRay , 2 days ago
-
Hi, Thank you. So its a Daikin Altherma 3M...
By Lbart68 , 2 days ago
-
I have a Contactum CU. Would the below RCBO (descriptio...
By Batpred , 2 days ago
-
RE: Samsung gen 7 HP 12kw - auto control issue and water law
@chainreaction Agree with @broadsman , it seems many ...
By Batpred , 2 days ago
-
RE: Anyone concerned about GivEnergy?
@transparent Thank you and appreciate your timely reply...
By SUNNYSKIES , 2 days ago
-
RE: Grant Aeona 3 R32 cycling with weather compensation.
The hot water heating looks normal. The heat transfer ...
By GrahamF , 2 days ago
