Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 13, 2026
It's great that HG are pushing this. But we must have some strong headwinds here! Every time I look for documentation on the Arotherm Pro, apart fr...
My view is of a very gradual growth of heat pumps, as our gas/electricity cost ratio is not a strong enough incentive. Also much simplification of ...
What I mean is in case inspections are being missed due to lack of funding, that is a false saving. But I have also seen cases where consumers lack...
I am not surprised, the solution must be to make sure whoever is inspecting cannot take shortcuts, and that they will engage with the consumer. As ...
@jamespa Yes, should be the same impact as the 7kw Plus. I spoke to UKPN and they just asked to use a form (as the portal system does not have t...
Could the Building Reg inspector not use some certificate issued by the installer on a self certify basis? Or any similar mechanism to obviate the nee...
Yes, often it goes up much quicker than it comes down..
@jamespa One reason is that the Arotherm Pro is currently awaiting inclusion in the ENA database (so not marked as "connect and notify"). This appr...
@annab Regarding the brands, the ones you mention are very common. Mitsubishi make R32 and also the newer R290 models, Vaillant Arotherm are all R2...
@jamespa It seems the Arotherm pro VWL 75/7.1 A 230V complies with IEC 61000-3-12 , exactly the same standard as the Arotherm Plus and the same lim...
@majordennisbloodnok We have a sort of inflatable rubber with a pipe, so there’s enough airflow to keep it dry…
We still have a gas fire for backup. The last gas engineers that visited got a bit excited when they noticed the rubber protruding and blocking the ch...
- 27 Forums
- 2,766 Topics
- 65.1 K Posts
- 2,204 Online
- 7,169 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Siting of the external sensor on a heatpump
I agree. However I would also (primarily) expect that ...
By JamesPa , 7 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
You should (almost) always reject having a buffer, by w...
By JamesPa , 10 hours ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 14 hours ago
-
RE: Is it the house or the equipment?
@majordennisbloodnok I do sympathise. On the original...
By springswood , 16 hours ago
-
No, but the heat pump must be capable of delivering a S...
By JamesPa , 20 hours ago
-
Sorry to hear about the problems, its going to be somet...
By JamesPa , 21 hours ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 1 day ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
booked it with Vaillant. will use them until i can find...
By AdamK , 2 days ago
-
RE: Adventures in heat loss calculations
I have seen it stated that the declared calorific value...
By JamesPa , 2 days ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 3 days ago
-
RE: Vaillant Aurotherm - Heater Wire Position
Ah, good point. I need to check if this was installed i...
By Batpred , 3 days ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 3 days ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 4 days ago


