Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
@lucia Octopus / Heat Geek seem to be making great strides at the moment; I imagine that this move should bolster confidence in many people going through the survey stage to have a heat pump fitted should they have been teetering on the fence. Octopus seem to have reduced the cost to affordable levels for a lot more people than say would have been the case a year ago. Are the waiting lists going to extend and extend I wonder? Regards, Toodles.
Toodles, heats his home with cold draughts and cooks food with magnets.
I would think so. It sounds like Octopus are just making an introduction, so I'm guessing customers just get quoted the same as if the customer came through the HG website. It will be interesting to see if this works. In my case, Octopus quoted £500 and HG quoted £10,500 (both net of BUS). I doubt many people who are lured in by Octopus's pricing will pay an extra £10k when Octopus turn them down.Posted by: @luciaOctopus has just announced they've partnered up with Heat Geek for ASHP installations...
I wonder if customers get the Heat Geek guarantee? 🤔
Posted by: @toodles@lucia Octopus / Heat Geek seem to be making great strides at the moment; I imagine that this move should bolster confidence in many people going through the survey stage to have a heat pump fitted should they have been teetering on the fence. Octopus seem to have reduced the cost to affordable levels for a lot more people than say would have been the case a year ago. Are the waiting lists going to extend and extend I wonder? Regards, Toodles.
They're revving up to get their in-house machine on the go I suspect. People like us in ASHP forums are not really their target audience - relatively speaking, we're the geeks! 😁
Octopus are aiming at the mass market who want plug-and-play and don't want any hassle.
Heat Geek theoretically extend OE's geographical reach but there's a shortage of qualified installers whoever they are.. In the past this would've been a perfect tech college City & Guilds course but alas, not any more. It will be interesting to see how this plays out.
Posted by: @ivanopinionI would think so. It sounds like Octopus are just making an introduction, so I'm guessing customers just get quoted the same as if the customer came through the HG website. It will be interesting to see if this works. In my case, Octopus quoted £500 and HG quoted £10,500 (both net of BUS). I doubt many people who are lured in by Octopus's pricing will pay an extra £10k when Octopus turn them down.Posted by: @luciaOctopus has just announced they've partnered up with Heat Geek for ASHP installations...
I wonder if customers get the Heat Geek guarantee? 🤔
Yes, HG installers pay a lot for their training & branding. They're in a seller's market so they get the $$$. I certainly couldn't afford them.
Octopus don't charge for their survey but HG do although it's deductible off the installation cost but I'm not sure what happens in terms of this Octopus alliance.
Posted by: @lucianot sure what happens in terms of this Octopus allianc
Are they just getting design input? Let's simplify the design to the bare minimum, ASHP controller, WC enabled, one over heat thermostat and a big coil cylinder and a diverter valve. Heat Geek have also developed or are, a tool to scan the house via a walk around with an iPad or similar, input some insulation values. Room sizes and volumes all calculate themselves from the scan, 3D image of house available, outputs min radiator sizes and heat pump sizing etc. it should also be able to spit out the WC you require.
My impression is that Octopus are just going to tell the customer "Sorry, you don't fit our criteria, but here are the details of a company who might be able to help you". Then the other company quotes as normal. Perhaps Octopus get a commission from the other company for any sales made. Or perhaps the other company just agrees to promote Octopus's smart tariffs? But I'm just guessing.Are they just getting design input?Posted by: @Anonymous
sounds very negative. But would suspect Octopus will want the easy 80% instead of the difficult 20% of properties. Not every property is an easy fit for an ASHP. A very simplified design is cheaper to install, run and ultimately better all round. Less likely to be messed with by people generally, there is way less to mess with.Posted by: @ivanopinionMy impression is that Octopus are just going to tell the customer "Sorry, you don't fit our criteria, but here are the details of a company who might be able to help you". Then the other company quotes as normal. Perhaps Octopus get a commission from the other company for any sales made. Or perhaps the other company just agrees to promote Octopus's smart tariffs? But I'm just guessing.Are they just getting design input?Posted by: @Anonymous
Posted by: @AnonymousPosted by: @lucianot sure what happens in terms of this Octopus allianc
Are they just getting design input? Let's simplify the design to the bare minimum, ASHP controller, WC enabled, one over heat thermostat and a big coil cylinder and a diverter valve. Heat Geek have also developed or are, a tool to scan the house via a walk around with an iPad or similar, input some insulation values. Room sizes and volumes all calculate themselves from the scan, 3D image of house available, outputs min radiator sizes and heat pump sizing etc. it should also be able to spit out the WC you require.
I asked today, no one knows the details yet except to say there's a major shortage of decent heat pump installers in some areas.
We were trying to figure out how Heat Geek could integrate with Octopus - some Octopus installers are also Heat-Geek trained - but HG's processes are different. Octopus in-house training is much more 'hands-on' - the guys I spoke to really rate it.
I think it's one of those 'all will be revealed in the fullness of time scenarios'. 😁
@lucia I had a good meeting with HG this week. They are genuinely trying to put systems in place to improve heat pump installations and they’ve developed some handy tools for their certified installers, and there are some interesting developments happening. Consumers also get Heat Geek’s guarantee which gives them more recourse than MCS’s empty promises.
https://upgrades.heatgeek.com/c/rhh
Get a copy of The Ultimate Guide to Heat Pumps
Subscribe and follow our YouTube channel!
I got a quote via the Heat Geek upgrades scheme, the guarantee was a factor in doing that vs just contacting an installer off the heat geek map.
@gunboatdiplomat interesting. And did you get quotes?
Get a copy of The Ultimate Guide to Heat Pumps
Subscribe and follow our YouTube channel!
Posted by: @editorI had a good meeting with HG this week. They are genuinely trying to put systems in place to improve heat pump installations and they’ve developed some handy tools for their certified installers, and there are some interesting developments happening. Consumers also get Heat Geek’s guarantee which gives them more recourse than MCS’s empty promises.
That sounds positive. I'm really interested to hear what they come up with.
However, Octopus seem to already be pretty good with the after service. On Heatpump Monitor there's at least 2 people who got pump changes because of oversizing and my lead installer said that if their system design didn't achieve what I needed they'd upgrade more radiators further down the line. Plus their annual service deal at £100 a year is ace.
If only Octopus had partnered up with Vaillant...
Britain needs to really invest in training because my suspicion is that lack of good installers is one big reason why install prices are so high. Bring back the local tech and City & Guilds!
- 26 Forums
- 2,697 Topics
- 63.3 K Posts
- 893 Online
- 7,106 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Electricity price predictions
Chinese manufacturing has the ability to be very good q...
By Majordennisbloodnok , 1 hour ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Forum Handle: GotGordon Manufacturer: Samsun...
By Gotgordon , 12 hours ago
-
RE: Summer heat is becoming the new winter cold in the UK. What are you doing about it?
@ian33a I am not easy with sleep either unfortunately…....
By MK4 , 14 hours ago
-
RE: Renewables uptake near you
In a village of under 40 houses...Conservation Area. I'...
By Tim441 , 1 day ago
-
RE: Home Alone with Home Assistant (previously A Beginner's Guide to ASHP Monitoring)
Great news, @bontwoody.
By Majordennisbloodnok , 1 day ago
-
Haier R290 Super Aqua Monobloc. Output capacity tables.
As I mentioned in my introduction post, I've been consi...
By Singlespeed , 1 day ago
-
RE: Air to air bus grant installer anywhere
I am consistently told by aircon folks (ie air/air) tha...
By EtchedPixels , 2 days ago
-
RE: What is possible with FIT, SEG, Hate Pumps and Batteries?
Thank you, everyone, for your replies. Our FIT provid...
By ian33a , 2 days ago
-
@mk4 And of course, the panels are less productive due ...
By Toodles , 2 days ago
-
RE: GivEnergy inverter tripping due to over-voltage?
I'm trying to get clarity on exactly when the inverter ...
By Tim441 , 2 days ago
-
RE: Samsung Heat Pump – Can't Activate TW2 Pipe Sensor (for Delta T Control)
Autocorrupt seems to be working overtime.
By Majordennisbloodnok , 2 days ago
-
RE: Vehicle-to-Home with a Heat Pump: Is the Technology Ready and Which EV Should I Buy?
I looked into that wallbox a bit more off the back of t...
By Majordennisbloodnok , 3 days ago
-
RE: Say hello and introduce yourself
@jandp awesome system I hope it works out well.
By Judith , 3 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@bobflux That's the stuff. The installer recommended tw...
By tomasmcguinness , 5 days ago





