Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
My Immersun power diverter problems now they have ceased trading
I have had an Immersun unit for 15 years that happily worked. It had problems on and off, but when we added 2 x 5.3KW batteries 3 years ago they sold me a new unit that would divert excess power to the immersion heater when the batteries were full. I never really got it working properly. I am now unsure what to do. The mobile app does seem to work and the unit itself seems to work but when I try to get it to heat the hot water even on boost it develops an error 4 sensor error and stops charging saying check sensor wiring thermostat is ON. has anyone else had problems with this?
I notice that the wireless sensor that should have two solid green lights on keeps cycling through various options of red/ green/ orange etc.
Also is there an up to date ip address to enable the unit and the app to communicate together?
Any advice would be welcome
Thank you
Peter
- 27 Forums
- 2,760 Topics
- 65 K Posts
- 2,080 Online
- 7,167 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
I think there may be some clues here that point to the ...
By cathodeRay , 28 minutes ago
-
There arent many of these hitachi pumps around here so ...
By JamesPa , 50 minutes ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
I think trying to deduce flow rate from an instantaneou...
By JamesPa , 2 hours ago
-
RE: 7kW EV Charger Options Advice
I’ve had an EV with wall charger for over 3 years and t...
By AndrewJ , 3 hours ago
-
My Adapt is finally installed and running! Almost a yea...
By tomasmcguinness , 3 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 3 days ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 3 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 3 days ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 3 days ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 3 days ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 3 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 3 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 5 days ago




