Recent Posts
 
Notifications
Clear all

Recent Posts

 |  Forums  |  Topics
Page 30 / 133
Posts with their shortened content
RE: Daikin 9kW to 8kW Swap Offer from Octopus  

By ASHP-BOBBA, 4 days ago

  @matban I would have to check the CIBSE guide as we have a software for this but its something like 3x for Kitchen and bathroom 2x for some other areas and 1.5 across the board in other areas but is s...
cathodeRay RE: Low Flow Rate Error - 8 kW Ideal Logic ASHP - Help!  

By cathodeRay, 4 days ago

  @wh0am3ye - it's just possible that is a huge buffer, the mother of all buffers, not sure. What about DHW, is that entirely separate, with a diverter valve? We can explore more tomorrow. Meanwhile get...
RE: Mixergy Tank Failure  

By Old_Scientist, 4 days ago

  You'd think, given the public profile of this thread and the presence of a representative from @mixergy that they would be pulling out all the stops to get this resolved TODAY. Unfortunately this just...
RE: Low Flow Rate Error - 8 kW Ideal Logic ASHP - Help!  

By Wh0am3ye, 4 days ago

  @cathoderay Honestly, I'm not sure. The flow and return come from the heat pump, in to the cylinder on the left side and then the flow and return out to the radiators comes out the cylinder on the rig...
RE: Ecodan Energy Monitoring Pack  

By CAMorgan, 4 days ago

  Hi @carpenterstation Did you ever resolve the energy monitoring for your cascade system as I have the same issue with a rencent install? Thanks. Caroline
RE: is a home battery without an EV worth it?  

By Batpred, 4 days ago

  I would find it difficult to justify a battery without renewable production or some sort of cheaper rate electricity. Having it just to enable the oven to work at peak time would not do it for us, we ...
RE: What is the Heat Geek Guarantee?  

By Batpred, 4 days ago

  Very useful post, one observation: I can see why installers want to stress the efficiency of the pump. Most people will tend to agree with the idea, but are homeowners really into competitions about ...
cathodeRay RE: Low Flow Rate Error - 8 kW Ideal Logic ASHP - Help!  

By cathodeRay, 4 days ago

  @wh0am3ye - can't make out all the details from that photo - is it separated (primary and secondary circuit) or just one big open circuit? Either way, you need to get the mesh filter out of the magn...
RE: Low Flow Rate Error - 8 kW Ideal Logic ASHP - Help!  

By Wh0am3ye, 4 days ago

  @cathoderay As far as I can tell, there is just the one filter, on the heat pump side of the cylinder (bottom left in the photo), I attempted to clean it out earlier on, but wasn't able to remove the ...
cathodeRay RE: Low Flow Rate Error - 8 kW Ideal Logic ASHP - Help!  

By cathodeRay, 4 days ago

  @wh0am3ye - do you have so called primary and secondary circuits (ie some form of separation of what goes through the heat pump and what goes through the rads)? If so, I guess the magnetic filter is o...
RE: Daikin 9kW to 8kW Swap Offer from Octopus  

By Matban, 4 days ago

  Mine was £265. It would be cheaper for Octopus. They could train up their surveyors, it needs an accurate floor plan which they are capturing anyway. They probably need to just train up some of the...
RE: Widespread failure of insulation installation  

By Batpred, 4 days ago

Forum Insulation
    And there are different kinds I guess. One friend of ours had one fit and after it was checked and considered ready, he found the house was still freezing. The pump was firing and stopping cont...
Page 30 / 133

 

 

 

Share:

Join Us!

Latest Posts

Click to access the login or register cheese
x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO