Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jul 31, 2026
Thanks for the nudge @judith Yes, I do have more technical information on the likely causes of the Iberian Outage,but please appreciate that I'm alr...
I agree @mark-h The Building Regs are now very readable...... although I do miss the sections of 'advisories' and illustrations of acceptable practice...
Thanks for letting us know @clockworks I admire your optimism that the thread is now 'closed'. It'll get re-opened at some point...... when someon...
Has the inverter got enough oomph to run your ASHP from the backup (always on) port?Or are you content to lose heat output during a power-cut?
Thank you @robs - that very useful data. The issue was mentioned to me by a Network Planner for a DNO. There's considerable diversification applie...
@jamespa - how is that the Vaillant data-logging is showing a COP below 1.0 on occasions? Separately... Do any of these manufacturer's data-logs...
I don't think the two conduits should be spaced horizontal to each other because they might block the flow of concrete when it's poured.That could lea...
Height above ground level matters only when you're considering the position at which you'll place the drain-valves.They'll obviously need to be at the...
That's great @fingers ICF construction is known to me, although it's not used much in my area. Let's look first at the conduit needed to carry the ...
I'm just trying to imagine this construction approach @fingers Is the concrete to be an 'internal' wall in which energy is stored as heat?And you ...
Do you know how this is being achieved? Is there data communication between the battery and Octopus?Or is this a user-setting which you've configure...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
@old_scientist Good news, at least some revenue was res...
By Papahuhu , 2 hours ago
-
RE: Indevolt Batteries UK Support & Info Thread
'hard limited' could be in 'admin' password protected s...
By JamesPa , 7 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Thanks. I do both, depending on purpose. For a quick po...
By cathodeRay , 9 hours ago
-
@mars my understanding is that it was the radiator manu...
By JamesPa , 9 hours ago
-
RE: Missing flow temperature in Heat Geek proposal
@batpred That makes sense! Thanks for the information.
By sttpd1917 , 12 hours ago
-
RE: Digest of UK Energy Statistics
The DUKES report for 2025 has just been published here....
By Transparent , 16 hours ago
-
And we're back to @editor's point about supplier depend...
By Majordennisbloodnok , 1 day ago
-
RE: Cleaning solar panels with a hosepipe
This is one reason I'd never make a good solicitor. I'm...
By Majordennisbloodnok , 1 day ago
-
RE: Microgeneration Certification Scheme (MCS)
I suspect this is why HG has massive ventilation losses...
By Batpred , 2 days ago
-
@trebor12345 If you select the Change Rate Plan button,...
By Toodles , 2 days ago
-
RE: Jokes and fun posts about heat pumps and renewables
@majordennisbloodnok Well, I can use such terms as HMRC...
By Toodles , 3 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
I'd picked up that there was a leak coming from around ...
By Sheriff Fatman , 4 days ago
-
SPONSORS
