Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 6, 2026
In response to @jamespa 's similar point, there is an unfortunate history of generation devices (inverters) continuing to output power after the time-...
It's the other way around @batpred Newer RCDs and RCBOs are most likely to have a small solenoid with the coil being energised via a control circui...
Allow me to me turn the argument around. Let's suppose it was the MCS proposing that "the solenoid coil in the RCBO won't burn out because the micro...
I recommend talking with Kensa Heat Pumps who are a UK GSHP manufacturer. They're nowhere near you geographically, but actually based almost as far ...
I respectively disagree @robl Here's the relevant paragraphs from the BEAMA Report which alerted the IET to the problem back in 2024 Th...
It's only in the past couple of years that bi-directional RCBOs have been available...... and only a year since it became illegal to fit a standard (u...
I don't think that is possible, which is why I described the problem in my post. The Plug'n'Play inverter could operate ok if plugged into a circuit...
Yes, in theory it can be installed safely...... but how would you enable Joe Public to know whether the socket it's being plugged into is supplied fro...
That's not bad. We've had visitors to this forum with cycling 20x per hour! If 'James' can't or won't resolve the issues, then you could take this...
SPONSORS
Degrees of Separation
Latest Posts
-
Panasonic Free Multi Z and Etherea Internal units.
My prospective installers have suggested the Panasonic ...
By Toodles , 2 hours ago
-
RE: Where heat loss surveys seem to go against practical reality
OK, this one is fairly easy, because most of what is ne...
By cathodeRay , 2 hours ago
-
I had the Hitachi Yutaki 7kw split ASHP system. As Jam...
By trebor12345 , 3 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Great. You just need to find a way of cranking up your...
By JamesPa , 4 hours ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
We had two heat pumps installed without Govt funding. H...
By Rob of York , 4 hours ago
-
RE: 7kW EV Charger Options Advice
I’ve had an EV with wall charger for over 3 years and t...
By AndrewJ , 10 hours ago
-
My Adapt is finally installed and running! Almost a yea...
By tomasmcguinness , 11 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 3 days ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 3 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 3 days ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 3 days ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 3 days ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 3 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 4 days ago
SPONSORS
