Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 19, 2026
@andy_e As Gary suggests, I suspect an errant CT Clamp or connection. Yes, PW3 should be able to run the HP (can’t be sure about the first second of s...
@downfield Let’s hope that Agile is going to drop soon (But perhaps thats just a fanciful wish on my part!) Toodles.
@tim441 I have been checking the Agile rates over the last few months and, sadly, most days the cheapest seem to be hovering around 15 per kWh and oft...
@njt Total production today: 11.6 kWh, the best day so far this year. 😊 Toodles.
@heacol I recall a considerable amount of discussion (relating to LLH’s mainly rather than buffer tanks as such though) some while back and one of the...
@ianmk13 Best effort here was 9.3 kWh on Jan.30th. Toodles.
@alfapat I think there is a line from the Engineer on Star Trek that to cover that! 😦 Toodles.
@ianmk13 My neck of the woods provided 123.2 kWh for the whole of January 2025. 🤢 That is with 8.1 kWp. spread over roofs and garden mounted. ...
I have only heard of 1 case of leakage (heard about it on a YouTube presentation) of the PCM and in that instance, it leaked out of the cabinet onto t...
@judith Well, I suppose I should be content with my 0.5 kWh then! 😉 Toodles.
@alfapat The general consensus is that the secondary circuit should run at a slightly lower rate thean the primary. This is a matter that @heacol is f...
@ecodan-efficiency I recently used the interwebby thing to see if I could join any supplier to take advantage of an EV tariff - though I have no vehic...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
Cloudy one done, might get the sunny one tomorrow or de...
By Watcher , 10 hours ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 1 day ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 1 day ago
-
At the risk of going on: A slight side issue for a foru...
By Bart , 2 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 2 days ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 2 days ago
-
RE: PV and battery long payback - sense check query
@jamespa I was just commenting on the speed, not sug...
By Batpred , 3 days ago
-
Readers here please note that Derril Water and many oth...
By Transparent , 3 days ago
-
RE: Advice on Vaillant Sensocomfort
Oops, I meant Sensocomfort (the UI to the controls)
By Batpred , 3 days ago
-
RE: Heat Pump Training vs. Real-World Installation
Our instal was very much the opposite. White haired blo...
By Batpred , 3 days ago
-
RE: Flushing system, cleaning and inhibitor
While skim reading a manual for our Vaillant HW tank, I...
By Batpred , 3 days ago
-
RE: 'Chinese Diesel Heater' to heat the home .....
Old thread but I'm new to the forum so new to me. How...
By BlizzardGreen , 3 days ago
SPONSORS
