Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 19, 2026
@dr-h My dealer may have believed what he had been told, but………. 😉Toodles
@grumpidoc Glad to hear that the speed change has improved matters; please ‘enquire within’ in the future as someone on the RHH is almost certainly ‘b...
@jamespa I was told some years back that ‘cold fill only’ was now the preferred option (obviously a cost saver for the manufacturers says the cynic in...
@jancold Just make sure those pipes you don’t install don’t leak either! Toodles.
@bontwoody Thanks @bontwoody, that was my reasoning but it lacked results in the end! Regards, Toodles.
@tim441 Thanks for the information Tim, seems as though Agile needs the user to be very agile these days! 😉 Toodles.
@nickmorgan We have a Sunamp Thermino eP210; this may be charged via the Myenergi Eddi with solar or grid energy. The recommendation for sizes is matc...
Most heat pump programmes allow you to set up a ‘set back’ so you may be able to use that expensive time as set back. I know the installers will likel...
Hello Nick, I hope you will document your progress as it will make very interesting reading for many readers. I have done a few of the things you plan...
@andy_e We shall see then… Toodles.
@andy_e Did the installer set up the Tesla PW3 app on your behalf? You may find that there are one or more settings in the Tesla app under the Powerw...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
Cloudy one done, might get the sunny one tomorrow or de...
By Watcher , 9 hours ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 1 day ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 1 day ago
-
At the risk of going on: A slight side issue for a foru...
By Bart , 2 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 2 days ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 2 days ago
-
RE: PV and battery long payback - sense check query
@jamespa I was just commenting on the speed, not sug...
By Batpred , 2 days ago
-
Readers here please note that Derril Water and many oth...
By Transparent , 3 days ago
-
RE: Advice on Vaillant Sensocomfort
Oops, I meant Sensocomfort (the UI to the controls)
By Batpred , 3 days ago
-
RE: Heat Pump Training vs. Real-World Installation
Our instal was very much the opposite. White haired blo...
By Batpred , 3 days ago
-
RE: Flushing system, cleaning and inhibitor
While skim reading a manual for our Vaillant HW tank, I...
By Batpred , 3 days ago
-
RE: 'Chinese Diesel Heater' to heat the home .....
Old thread but I'm new to the forum so new to me. How...
By BlizzardGreen , 3 days ago
SPONSORS
