Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jan 24, 2023
The fully exposed pipe is the pressure relief outlet from the unvented mains pressure hot water tank. My feeling is that there is just not enough in...
@derek-m Hi Derek, I have now managed to take a look at the controller and wiring and as far as I can tell our system does not match any of the e...
@derek-m Thanks Derek. I probably won't get a chance to look at this until after Christmas. When I do I'll get back to you with what I find out.
@derek-m I tried drawing everything out, but it just ended up a confused mess, so I'll try and describe it as best I can. UFH is to ground floor ...
@batalto @kev-m On reflection I think you're probably right - the installer just hasn't set things up properly. I just haven't quite summoned up t...
@derek-m Hi Derek, I have no doubt that our installers are fluent in BS, but my comments about the firmware were my own suspicions based on admit...
After several fruitless voicemails and emails, I finally got fed up and had a go at balancing the radiators myself last weekend. Funnily enough, with...
@editor We have a Halifax Home Emergency Policy, which states that we are covered for: "Complete failure or breakdown of either the heating and/o...
Finally managed to get our installer out to have a look at our system last Thursday, only for the "engineer" to turn up and tell me he wasn't their to...
Our installer quotes £160 for an ASHP service, but I suspect this doesn't include the cylinder. Mitsubishi themselves have a price of £162 on their w...
@rv3 Do you have the MMSP package? We have 2 electricity meters and a heat flow meter specifically to measure our usage and delivered energy. One...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
I am amazed that there is not something out there to me...
By JamesPa , 3 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 8 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 13 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 1 day ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 1 day ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 4 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 5 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 6 days ago
SPONSORS
