Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jan 24, 2023
@kev-m Yes, I am not unhappy with that usage. Will have to see how it goes over the next few months, but it looks as though it's working out cheap...
@george @kev-m @rv3 I now have a full month of figures to work with, and I don't think my energy consumption is quite as bad as it seems from the Me...
@batalto Thanks for the suggestion - I'll give it a go.
@derek-m Hi Derek, TRV's are closed in my wife and I's bedroom because we like a cooler room to sleep in. TRV's are fully open on the first floo...
You haven't met my wife - that would not be a popular suggestion 🤣
Yes, that is true, and when I think rationally the numbers are less scary - I just need to get into the mindset that they represent our entire energy ...
@derek-m Hi Derek, Our installer has promised me a call back from someone in their technical team within the next 24 hours. Given their previous ...
@derek-m Hi Derek, Energy used and produced readings were taken from the FTC controller. No, I'm afraid we don't have any heat loss calculation...
@jeff Meter readings are from a smart meter. Nothing available online, because the meter hasn't been able to connect to the metering network since...
@derek-m Hi Derek, This is a quick sketch of our system that I knocked up this morning, not sure if it gives you all that you need: Also, her...
@derek-m Thanks for the advice Derek. I would like to leave the system in weather compensation mode for a day or so longer, so I can get realistic...
- 27 Forums
- 2,793 Topics
- 66 K Posts
- 1,501 Online
- 7,196 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Cooling/heating with one unit
"The way we use A2A on a cheap overnight EV tariff is t...
By mrkfm , 53 minutes ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
We have ‘signed on the dotted line’ today for a Panason...
By Toodles , 1 hour ago
-
RE: Heat pump branding. Clever, contemporary… or a bit too much?
...or it was there and was lost thanks to laziness and ...
By Majordennisbloodnok , 2 hours ago
-
@bobflux Thank you for your response. I am trying to ...
By RonV. , 2 hours ago
-
This post is about how I successfully configured a buff...
By Tony.Stolz , 5 hours ago
-
The installer visited yesterday and suggested the noise...
By JamesChatz , 7 hours ago
-
RE: Heat Geek installations: share your experiences
I struggled with this problem as well. An independent t...
By L8Again , 7 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Your house sounds a lot like mine. 2 surveyors each sp...
By JamesPa , 9 hours ago
-
RE: Heat Geek Zero Disrupt: Are We Sleepwalking Into Another Race to the Bottom?
Thats true only if you do the wrong experiment. Done c...
By JamesPa , 10 hours ago
-
RE: How should the Boiler Upgrade Scheme be reformed?
@temperature_gradient Isn't that just describing a regu...
By Prunus , 10 hours ago
-
RE: battery storage without solar
As of October 1st they need specific qualifications to ...
By EtchedPixels , 23 hours ago
-
RE: Renewables & Heat Pumps in the News
With regards to the BUS grant raid, I gave it more thou...
By ASHP-BOBBA , 24 hours ago
-
RE: Why are ASHP installs so expensive?
The whole system seems to work on the basis of...
By ian33a , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Good plan. If you can get half hourly meter readings a...
By JamesPa , 1 day ago



