Last seen: Jan 14, 2026
@jamespa Looked for how to find and instal HACS. Might be somewhat beyond my ability. I did say that I was sh*t at tech stuff?
How do I find the intergrations you mention? I searched on HA and 'Alpha' doesn't appear anywhere.
@majordennisbloodnok AlphaESS Smile5 5.0kW Hybrid Inverter.
How does one discover if their inverter, battery storage and ASHP are compatible with Home Assistant? Is there a specific site whereby you enter your ...
@hcas 14x 500w solar panels. 2x 5.7kw battery storage (Should and will be 2x 10.1kw battery storage). 1x 5kw Hybrid inverter.
@editor That’s an interesting read, thank you. Having read it I feel that an iBoost with an ASHP might not be as effective as I might have hoped. I s...
@derek-m LOL what a conundrum. And I hoped the decision would be easy. 😆
@gary, I do not wish to keep either of the smaller batteries, and I can't keep just one. They are a bit like hard drives in a multi-drive NAS and must...
@gary At the moment excess is exported. Not getting paid for it yet though. The installation is so recent we don't yet have the MCS cert'. Whilst ...
My take from the above is; If the DHW is never stored below 45c the a LHC to 60c is unnecessary? So, is it cheaper to maintain a temp’ above 45c and...
@bbmorales There is no need, imo, to run a legionella cycle as often and it would be better run during the night on cheaper rate electricity. The A...
- 26 Forums
- 2,418 Topics
- 54.8 K Posts
- 352 Online
- 6,098 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Reliable, easy to use home battery options
@editor We had our Samsung Gen 7. 12 Kwh ASHP installed...
By Broadsman , 2 hours ago
-
RE: How to use my Hanchu battery storage for home without it feeding back into the grid?
Hi. My Hanchu battery system is controlled by the (Lux...
By SKD , 2 hours ago
-
RE: Ecodan Pump Issues… Circulation pump turns off when heat pump compressor turns off
Unfortunately it seems to be oversized. I can answer to...
By ASHP-BOBBA , 2 hours ago
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
@jamespa thank you again. Apologies I missed you pointi...
By MairiA , 2 hours ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
In the Home Assistant firmware the data points...
By F1p , 13 hours ago
-
RE: GSHP WOES! Midland based engineer recommendations?
@johnbroome if it is not the pressure in the expansion ...
By ASHP-BOBBA , 13 hours ago
-
So I hear the export MPAN that UKPN assigned should be ...
By Batpred , 16 hours ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
From what I read, the Solis has a very long list of err...
By Batpred , 16 hours ago
-
RE: Ideal HP290 14kW ASHP - how to optimise
Roughly this should cost you £250-£300 per peak month a...
By ASHP-BOBBA , 17 hours ago
-
RE: New Daikin 11kW Altherma 3M install - is it working as it should?
@toodles Thank you for your input. As the days have got...
By Synthbuilder , 21 hours ago
-
RE: Fan unit Making terrible noise HELP!!
@gutoffowc Oh no, sorry to hear that, are you in the Ke...
By ASHP-BOBBA , 23 hours ago
-
RE: Sunsynk Whole House Backup Issue
@sheriff-fatman - could you please re-post that in the ...
By Transparent , 24 hours ago
-
RE: Running my new Nibe ASHP efficiently
I didn't. I spent a while manually messing around with ...
By jamieheatpumpnew , 1 day ago
-
RE: I’m glad the cold spell is over!
I comparison with the 65kWh used above yesterday was on...
By Judith , 1 day ago
-
RE: Octopus Cosy 12 Heat Pump Regret: Incredibly Loud, Poor Heating & Constant Hum - Help!
I should think so, I thought that pretty much universal...
By JamesPa , 1 day ago
-
RE: Setback savings - fact or fiction?
I'm also inclined to look into how a defrost is actuall...
By cathodeRay , 1 day ago
-
MLCP (Multi-Layer Composite Pipe) for ASHP
@editor nope. The info you reported was sufficient for ...
By iotum , 2 days ago
-
RE: Experience - New Build / Complete New Heating System
@vincro I would be surprised if it is much above 5 to 6...
By ASHP-BOBBA , 2 days ago

