Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: May 7, 2026
Your ideas are good. It could also be that your home internet line has crashed. No way to tell while away.
The first user can set up multiple users and allow them access to melcloud. You can do this while away, as long as you can login. You only need to be ...
Firstly, not exactly. Using any heat pump, it's better if the TRVs are open and the room holds its relative temperature because the designer was wise ...
Yeah, it does that. I say yes to shutting down, change the settings, then when finished and exited back to the home screen, press :power: to start the...
Surely 60 mins will see a fast -reacting home overshoot and undershoot repeatedly?
By the way, I'm pretty sure locking the heating controls is not legal and definitely not if you're paying for the energy used. Right to quiet enjoymen...
Not only "not the best way", but it probably won't even work unless you've got the central heating flow temperature set to gas-style high temperatures...
"Better" in that it's more efficient and less confusing to other inhabitants than having the controller flip between thermostat and curve modes. If on...
Well, when I started this attempt, it was keeping temperature controlled but still cycling a bit and nowhere near achieving the published efficiency (...
I think you may be in danger falling for the "24x7 on" heat pump myth challenged in another discussion on here. While running low longer may be cheape...
Only that you need an initial value for flow temp when starting up or the external temperature changes rapidly. That's where your weather compensation...
Maybe it's cheaper not to, they sell plenty of high priced units without it and they don't think it'll help them sell more than it costs to develop th...
- 27 Forums
- 2,753 Topics
- 64.7 K Posts
- 1,365 Online
- 7,158 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Switch suitable to change between two inverter CT's
Last winter my battery ,32KWh, could run the house com...
By Jancold , 34 seconds ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@rob-of-york Thank you for that, whilst familiar with t...
By kilgorexv , 7 minutes ago
-
RE: Adventures in heat loss calculations
Was the tweaking adjustment of assumptions to fit the f...
By JamesPa , 14 minutes ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Agree with Major. And even if I was very happy with ...
By Batpred , 50 minutes ago
-
RE: Is the "divide by 2900" rule still valid?
There is another estimator that you could use, a formul...
By Rob of York , 4 hours ago
-
RE: Glass lined Cylinder for private water supply
@davidb That's really interesting information, thank yo...
By ian33a , 4 hours ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
@penval, really useful update. After all the discussion...
By Mars , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 3 days ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 4 days ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 4 days ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 4 days ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 4 days ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 4 days ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 5 days ago



