Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Nov 11, 2025
The problem is that even if a Manufacturer comes to site it can be a mixed bag on who you get. Some like Vaillant will blame the installer before t...
@toodles I know Greenwave, they are a good team. So don't diss the installer so quickly, sounds like a manufacture fault, or a setup issue.
Can you give me picture of the controller please? There has been a recent upgrade to the controller, but it won't work with the older units. You n...
And yes this was a Grant unit.
@allyfish ripped loads out and made open loop systems, heres just the left overs from one i did last year.
@grahamf happy to help, ive had 4 heat pumps here to test. Currently im running an old Samsung unit, fully open loop, 1 pump, my own automated weath...
@crimson it all depends, on how many rads/ufh are fully open (no actuators or TRVs, a volumiser won't hurt the system (i have 420l worth), that i can ...
@crimson is it this heat pump
My circulation pump cycles, when the compressor is off, heating is still active on the controller (but all is up to temp), its testing the water (lite...
Should have all you radiators and control the load with the heat pump controller, already sound like you're microzoing to try and co...
@crimson if its the Aerona 3, check that you have the latest software, GRANT should be able to help you with this, i know they had a few updates with...
@crimson have changed the pump speed on the Aerona itself, think default is speed 3, you want to try and get both pumps running the same speed(flow ra...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
@rob-of-york Interesting that you mentioned this as an ...
By ian33a , 1 hour ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 2 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 8 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 23 hours ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 23 hours ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 24 hours ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 1 day ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 1 day ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 3 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 4 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 6 days ago
SPONSORS
