Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 23, 2026
I wasn’t sure reading your quote if I had correctly understood that they predicted you would be paying more in bills than at present. Then on p36 is i...
@ian33a Hi Ian, you may be pleasantly surprised surprised at how well your 15kWh battery does on the Cosy tariff. You just work it 2.5 cycles per day....
Vehicle to Grid is the further step and here is the IEA’s prediction on this
Thinking about this, we all bash MCS for their inadequate regulation (rightly so imho) but if a commercial company with a separate quality system depa...
@toodles in extreme frustration in identifying myself some years ago at the gov portal to pay my tax I reset everything and told them to send a new ...
MCS are a classic quality issue. In every company that I’ve worked for all had quality systems at the highest level. But at no point was the quality o...
Roll-out external awnings prevent the sun’heat getting in. This is one example Ours are manual roll out ones with a metal winding poll. We ha...
@davidb if you tick the box which says subscribe to the thread then you’ll get notified.
This thread from a couple of years ago goes into more details and as James implies heat loss calculations come first. You may not need the 100mm spaci...
The technology is developing very rapidly right now but there’s no standard interface they are all proprietary. I’ve been doing some research in case ...
@phleach welcome to the forum and what a lovely project to have. To ensure your ufh can be run at the lowest temperature you should get your plumber t...
One or two weeks of summer! Since southern England has a heat wave now in May, you know what you’ll get next, possibly 6 weeks of summer! &...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 21 minutes ago
-
That's consistent with your heat loss calculation. Yo...
By JamesPa , 31 minutes ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 14 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Swings and Roundabouts, you win some…. ...
By Toodles , 14 hours ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 22 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 22 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
There is scope for product development here. I for one...
By JamesPa , 1 day ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 2 days ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 4 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 5 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 5 days ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 6 days ago
SPONSORS
