Search with Wattson
Activity
 
Notifications
Clear all

Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!

JamesPa
JamesPa
@jamespa
Moderator
Illustrious Member
Joined: Apr 3, 2023
Last seen: Oct 22, 2026
Topics: 28 / Replies: 5526
Reply
RE: ASHP and how it should run and potential kw consumption?

Its a complex system, probably over complex to be sensible and certainly too complex to work out what might happen with any certainty if you change op...

2 years ago
Reply
RE: ASHP and how it should run and potential kw consumption?

You could be right. What do you know of the design/history of the heating system (not the heat pump, the emitter system). Its quite bizarre that the...

2 years ago
Reply
RE: How much radiator capacity do I need for an air source heat pump?

Agreed, Put another way it may sometimes be better to heat the house to a slightly higher temperature to avoid cycling. I can easily believe that is...

2 years ago
Reply
RE: ASHP and how it should run and potential kw consumption?

Im not surprised, two differnt heat curves will likely confuse it. I have only 1 and have turned off all autoadaption or room temp compensation and e...

2 years ago
Reply
RE: Totally bewildered with my ECO4 heat pump installation

I can possibly help. First some explanations, then a comment then some more info needed from @jaynieq Explanations: kWh is energy, W is power...

2 years ago
Reply
RE: How much radiator capacity do I need for an air source heat pump?

Just for clarity my numbers, collected together, are: Design OAT: -2 Design FT @ -2: 45 Measured house loss @-2: 7kW Rated output of '7kW' Vail...

2 years ago
Reply
RE: ASHP and how it should run and potential kw consumption?

I think you have a Vaillant, in which case (on the sensocomfort) its settings - installer level - noise reduction mode. I run mine in noise reductio...

2 years ago
Reply
RE: ASHP and how it should run and potential kw consumption?

Mine followed a similar general pattern, but the defrosts (I assume the dips are defrosts) were more like once per hour. The snow day was both very w...

2 years ago
Reply
RE: ASHP on a low income: a cautionary tale

That's really good and simple. Obviously a gross generalisation but inevitably so if its going to be simple! I might well use this when talking to p...

2 years ago
Reply
RE: Thinking of ripping our my IVT Greenline HT Plus C model and replacing with a gas boiler.

That's a pity, the most expensive part of a GSHP is, SOFAIK, the underground bit by some margin, which you already have! Unfortunately we live in a ...

2 years ago
Reply
RE: How much radiator capacity do I need for an air source heat pump?

10kW is based on the design FT of 45. Most of the upstairs emitters are rather 'oversized' (for FT45) because I upgraded them before I realised quite...

2 years ago
Reply
RE: Controversial opinions - pure weather compensation, buffer tank, heat loss, oversized heat pumps

Thats a fair observation, although some of the 'cheaper' brands (eg Samsung) with very basic controllers seem to have caught up in price certainly wit...

2 years ago
Page 344 / 464
Share:

SPONSORS

Join Us!

Installer Finder

Degrees of Separation

Latest Posts

SPONSORS

Members Online

Click to access the login or register cheese
Protected By
Shield Security PRO