Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jan 14, 2025
@squonk further to my previous note regarding pipe swap: If the system has glycol in its not as simple as I described. Plenty of info googleable for ...
@derek-m no worries! have to say though this one is a perfect demonstration case for "don't assume; check the basics; measure it to be sure". Its only...
@derek-m the OP already said, the installer was out of his depth and has since retired so the "back to the installer" option doesnt work in this case....
ok, my intent is put an ESP8266 with a CT clamp around the main power inside the outdoor unit. as I feel that's easiest place to get at the main power...
@squonk It must be the case that the direction of flow on your two connections to/from the ASHP, on the left side of the buffer, is the opposite of wh...
how are you guys calculating COP with the samsung? I don't see a modbus register for energy (input or output)? are you doing input= electrical ene...
@william1066 so my system did the experiment for me today. I currently have a commissioned ASHP, the flow side goes to a 50L volumiser, then there i...
@redzer_irl yes, I tried the exact same location as you have done for mine as it seemed designed for the board, right size mounting socket. but the bl...
@steven Thanks very much for posting your ESP config on github. I just copied it into mine and it worked first time 🙂 I'm using an ESP8266-12F pre...
@rumballd so if it was facing out when you viewed the house, that's your quickest option, it suggests the pipework will cope with that rotation. Elect...
are you 100% sure they are within specs? Do you have a specific link to the document that says so? the unit I'm installing for myself has a min cleara...
@mike-h yep, I have the sealant and the special brackets. interesting technique to learn fitting the pipes without using any pipe clamps only insulati...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
Cloudy one done, might get the sunny one tomorrow or de...
By Watcher , 3 hours ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 20 hours ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 1 day ago
-
At the risk of going on: A slight side issue for a foru...
By Bart , 1 day ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 1 day ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 2 days ago
-
RE: PV and battery long payback - sense check query
@jamespa I was just commenting on the speed, not sug...
By Batpred , 2 days ago
-
Readers here please note that Derril Water and many oth...
By Transparent , 2 days ago
-
RE: Advice on Vaillant Sensocomfort
Oops, I meant Sensocomfort (the UI to the controls)
By Batpred , 2 days ago
-
RE: Heat Pump Training vs. Real-World Installation
Our instal was very much the opposite. White haired blo...
By Batpred , 2 days ago
-
RE: Flushing system, cleaning and inhibitor
While skim reading a manual for our Vaillant HW tank, I...
By Batpred , 2 days ago
-
RE: 'Chinese Diesel Heater' to heat the home .....
Old thread but I'm new to the forum so new to me. How...
By BlizzardGreen , 3 days ago
SPONSORS
