Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jan 14, 2025
@bontwoody pretty sure it will yes. This doc is your bible (page 23) @derek-m I'm actually trying to setup public visibility of my stats via emoncms...
So: trying to put a "I'm not an engineer, I didn't install my own HP and I don't spend hours reading about this stuff" hat on, the below would be m...
BTW, here's the effect of PWM. I think we're right at the min output of the ASHP once this reaches steady state at around 14.45. without PWM I suspect...
quite possibly. when you do the maths, thats 125W on standby, which is not out of the question. there's a lot of discussion in various places about wh...
@iantelescope I gave you the midsummer wholesale doc several messages back. B1 and B6 are permanent L/N. when connected to these, the pump will run...
@theallan I'd definitely suggest you draw a schematic to help us understand, the overall layout and where the metering points are. that may start to g...
double double check it is the right version - as the pic is for an AUTO - and includes the PWM cable . Have seen it sold without (even though its a PW...
A is what you want for heating. C is for solar. the FLEX AS is available on a number of sites. just make sure you get that one not the AUTO you alread...
@bontwoody I think they don't like being just a pump distie and want to keep stock to sell with a heat pump as a package. They've been good with th...
disagree. pump behaviour tells User if PWM is working or not. agree ok, good luck! disagree. documentation from at least one samsung s...
@jamespa I agree with you about BUS adding cost to install contracts. which is one reason why I did what I did. (see my write up). But, if the house...
@bontwoody yay! the PWM gang gets another recruit. you can always keep the non-PWM one as emergency spare.
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@lizzie that is useful info, thanks. I’m currently con...
By AndrewJ , 41 minutes ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 12 hours ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 18 hours ago
-
At the risk of going on: A slight side issue for a foru...
By Bart , 24 hours ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 1 day ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 2 days ago
-
RE: PV and battery long payback - sense check query
@jamespa I was just commenting on the speed, not sug...
By Batpred , 2 days ago
-
Readers here please note that Derril Water and many oth...
By Transparent , 2 days ago
-
RE: Advice on Vaillant Sensocomfort
Oops, I meant Sensocomfort (the UI to the controls)
By Batpred , 2 days ago
-
RE: Heat Pump Training vs. Real-World Installation
Our instal was very much the opposite. White haired blo...
By Batpred , 2 days ago
-
RE: Flushing system, cleaning and inhibitor
While skim reading a manual for our Vaillant HW tank, I...
By Batpred , 2 days ago
-
RE: 'Chinese Diesel Heater' to heat the home .....
Old thread but I'm new to the forum so new to me. How...
By BlizzardGreen , 3 days ago
-
I'm not sure why you would want to make it more difficu...
By JamesPa , 3 days ago
SPONSORS
