Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jan 14, 2025
@editor my point is really that you said you used Xkwh - but that was the whole house - you have no separation for heat. without that its meaningless ...
do you monitor your COP or heat energy output ? or meter the HP separately? I think you need to have that to be able to talk numbers. I know you are...
all that data you ask for is in the feeds that are uploaded to heatpumpmonitor.org by multiple systems. if you were to post this on openenergymonito...
WC and flow temps - main thing is that they set WC , but also give you instructions on how to change it. likely scenario is that if they set it at all...
@dunlorn yeah it should be perfectly possible to treat them just as independent heat sources, decouple the master-slave, if send them both a call for ...
IMO the only vendor independent system of monitoring is to put in a heat metering setup and link it to openenergymonitor. I've nothing against modbu...
@dunlorn I was just pondering a possible idea for you: you could take control of each heat pump individually via modbus, run them as 2 separate rather...
@dunlorn would it be feasible to individually control your two units rather than rely on samsung's master slave behaviour?
@dunlorn FWIW, I was running at about 9kw also on saturday (-2C here all day), flow rate of 28l/min , that kept us at 21C inside . pretty sure that i...
static head isn't relevant, the water goes round in a circle, what goes up must come down. What matters is the resistance to dynamic flow. Given that...
mine for the 29th, max 3C day then -2 at night. 41kwh of electricity for 110kwh of heating. short-term COP is nearly 3 when it stable running in heati...
a few of us here are on that monitoring platform. I'm the "milton keynes samsung 16kw" one. direct link to mine's in my sig.
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 5 minutes ago
-
RE: The good, the bad and the not that great – my heat pump installation
So sorry to hear that. If there is anything more we ca...
By JamesPa , 1 hour ago
-
At the risk of going on: A slight side issue for a foru...
By Bart , 6 hours ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 7 hours ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 22 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@lizzie Thank you, very interesting and useful informat...
By Toodles , 1 day ago
-
RE: PV and battery long payback - sense check query
@jamespa I was just commenting on the speed, not sug...
By Batpred , 1 day ago
-
Readers here please note that Derril Water and many oth...
By Transparent , 1 day ago
-
RE: Advice on Vaillant Sensocomfort
Oops, I meant Sensocomfort (the UI to the controls)
By Batpred , 1 day ago
-
RE: Heat Pump Training vs. Real-World Installation
Our instal was very much the opposite. White haired blo...
By Batpred , 1 day ago
-
RE: Flushing system, cleaning and inhibitor
While skim reading a manual for our Vaillant HW tank, I...
By Batpred , 1 day ago
-
RE: 'Chinese Diesel Heater' to heat the home .....
Old thread but I'm new to the forum so new to me. How...
By BlizzardGreen , 2 days ago
-
I'm not sure why you would want to make it more difficu...
By JamesPa , 2 days ago
SPONSORS
