Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jul 24, 2026
Mars this is tempting, but im not dishing the dirt. I know some amazing installers too.
thats madness no plumbing system is supposed to leak , ever. sounds like its time to get someone good in. where are you i might be able to recommend s...
@saz your heat pump should not break down, have you asked the installer back? like all technologies if its installed well it works seemlessly if its n...
@mjr i have no idea, ask Ofgem, im just telling you how its going to work. Ofgem know all the answers
i would advise using the midea app from freedom, its very impressive, give them a call im sure its not very expensive and you can fit it really easily...
tbh all the readings you get from the units themselves are soewhat dubious, they do things like forget to measure the fan and pcb power etc if y...
@derek-m all good points but since almost no one reads the instructions they dont know the capacities can be changed. No manufacturer will ever tel...
@cathoderay flicking the dipswitches so a 16 becomes a 14 or 12 just changes the max output. All the switch does is limits the max output of the unit ...
@batalto legend thanks, thats perfect
@cathoderay No manufacturer or distributor will ever tell you that the units can be adjusted for capacity but its always been the case, they just r...
@batalto cool can you crack this one open for me its called mcs031, some cells are protected its really annoying, im trying to automate it.
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Electricity price predictions
The press release says how it is funded for this financ...
By JamesPa , 2 hours ago
-
RE: Missing flow temperature in Heat Geek proposal
@editor I went through HG website, so should be ok for ...
By sttpd1917 , 2 hours ago
-
Who did the Freedom Heat Pump cloud server and what did...
By Mars , 3 hours ago
-
RE: Samsung heat pump - data cable issue
+1 CAT5 and 6 work absolutely fine for RS485 until th...
By bobflux , 4 hours ago
-
RE: Who's your electricity provider and what's your tariff?
Reading between the lines of what octopus are doing wit...
By JamesPa , 4 hours ago
-
RE: Indevolt Batteries UK Support & Info Thread
@jamespa Years ago, I used to attend location recording...
By Toodles , 4 hours ago
-
RE: Air to air bus grant installer anywhere
The through wall two hole ones have their place (listed...
By EtchedPixels , 5 hours ago
-
I hope it goes ok, Hon can be hard to set up IF the sof...
By Graham Hendra , 6 hours ago
-
@clockworks Hi, So there is a big difference between st...
By ASHP-BOBBA , 6 hours ago
-
@editor wellvery comprehensive answer. I will get all i...
By Keithb , 9 hours ago
-
RE: Advice on my Heat Pump Journey: Old Stone Built Detached Cottage
all good advice I will follow this up
By PaulC , 11 hours ago
-
Heat of vaporization of water is 2.25 MJ/kg (0.625 kWh/...
By bobflux , 1 day ago
-
RE: Existing Solar Panel installation - structural roof calculation check
What will also happen is that they see that there is so...
By EtchedPixels , 2 days ago
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
It's a great looking piece of kit and the 5kw is very q...
By avenir , 3 days ago
SPONSORS
