Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jan 6, 2025
We found that swapping out heated towel rails for dedicated bathroom radiators made a huge difference as they actually give off heat instead of retain...
We also fitted a surge protector on the main board at the recommendation of the plumber working on our extension as he worked on a job where someone h...
Has the ASHP been checked to see if its repeatedly going into antifreeze/frost protection mode? I had a period of time with our Mitsubishi ecoda...
Have LG confirmed what size ASHP is suitable? Do you have access to the system data showing flow rates/temps etc? It would be interesting to see...
Yep that was my review 🙂 I think our ASHP is probably under sized for our property but as we are south west facing and have lots of rear glazin...
The EPC states 418M2. Our hot water usage is much higher than average as we usually have 7 people living here and in the last year we had 11 peo...
Have you considered fitting an auto refill valve to keep the system topped up and pressurised?
We use Heatmiser Neo thermostats for all of our downstairs underfloor heating and the Honeywell Evo system upstairs for our radiators that works reall...
I've attached the performance data for our 14kw Mitsubishi Ecodan ASHP. All data used is from the units software/controller so I can't confirm how acc...
The EPC system is a bit of a farce. I'm aware of people who issue some EPC's without even visiting the property 🤣 There is a massaging o...
We had our ASHP serviced for the first time in December 2020 - roughly one year after installation. I would like to have used the installer but ...
Our 14kw Mitsubishi Ecodan ASHP and 500l cylinder was installed by Artizan Heating/Lifestyle in 2019. I dealt directly with the Owner Michael wh...
- 27 Forums
- 2,758 Topics
- 64.9 K Posts
- 1,605 Online
- 7,162 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
I am amazed that there is not something out there to me...
By JamesPa , 6 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 11 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 16 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 1 day ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 1 day ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 2 days ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 4 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 5 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 6 days ago



