Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Oct 18, 2026
@glanmenai, it never even occurred to me that form factor of heat pumps could be an important factor in the decision making process, which makes perfe...
@batalto, we interviewed Graham Hendra today and he says that the RED ASHPs are arguably the best heat pumps on the market, but they come with a hefty...
@Morgan, that's great news. I won't be raising this with the MCS then 😀
Good idea Derek. I'll ask them to comment about what one can do when non-MCS accredited installers don't deliver a job properly.
@Morgan, that is very frustrating. I will raise this and see what suggestions they have. I'll share them with you before the video goes live in case y...
That's good to know. We're interviewing the CEO of MCS a week on Monday via Zoom, and I would be happy to raise this with him in the interview. We won...
@Morgan, that's so frustrating. Are they MCS accredited? If yes, you could look at lodging a complaint with MCS.
@gonzho, welcome to the forums and look forward to seeing your results. Please also DM me if you'd like to write an article on this that we could publ...
Derek, I don't my message was clear - the flow rate has been dropped to 35C with the heat curve option selected (not CH set point).
@derek-m, I simply lowered the flow rate as the weather compensation didn't appear to be doing anything.
Further to Derek's assistance with our heat pump, our weather compensation has had zero effect on our efficiency. For the past 10 or so days, I've ...
Our first video has been recorded and we’ll start the edit tomorrow. A big thank you to Bob Beattie (@bobbt9866) for being our first guest and for sha...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Renewables & Heat Pumps in the News
It's also hardly unusual. The Midea portasplit won a ra...
By EtchedPixels , 1 hour ago
-
RE: How quickly would you want/expect heat recovery to take from setback?
That's the issue, those graphs show your heat-pump (in ...
By Temperature_Gradient , 2 hours ago
-
RE: How should the Boiler Upgrade Scheme be reformed?
Not quite, regular A2W heat-pumps need a load of extra ...
By Temperature_Gradient , 2 days ago
-
RE: Heat Geek installations: share your experiences
one thing i learnt from reading people’s comments and e...
By Batpred , 2 days ago
-
RE: Cooling/heating with one unit
"The way we use A2A on a cheap overnight EV tariff is t...
By mrkfm , 2 days ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
We have ‘signed on the dotted line’ today for a Panason...
By Toodles , 2 days ago
-
RE: Heat pump branding. Clever, contemporary… or a bit too much?
...or it was there and was lost thanks to laziness and ...
By Majordennisbloodnok , 2 days ago
-
@bobflux Thank you for your response. I am trying to ...
By RonV. , 2 days ago
-
This post is about how I successfully configured a buff...
By Tony.Stolz , 2 days ago
-
The installer visited yesterday and suggested the noise...
By JamesChatz , 2 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Your house sounds a lot like mine. 2 surveyors each sp...
By JamesPa , 2 days ago
-
RE: Heat Geek Zero Disrupt: Are We Sleepwalking Into Another Race to the Bottom?
Thats true only if you do the wrong experiment. Done c...
By JamesPa , 2 days ago
-
RE: battery storage without solar
As of October 1st they need specific qualifications to ...
By EtchedPixels , 3 days ago
-
RE: Why are ASHP installs so expensive?
The whole system seems to work on the basis of...
By ian33a , 3 days ago
SPONSORS
