Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: May 14, 2026
I also find my Ecodan's response to input temperature changes to be very slow, and sometimes non-existent. Sometimes it will stay off at a room temp...
@morgan did the system time change last night? if so you may have a different version to me - I think I am on FTC5. But my time was incorrect this...
It advances the system time by one hour. The time is shown in the display.
Yes they need power - but very little IIRC. Perhaps 20W per rad. You wouldn't get much air movement without it. I had 13A sockets nearby and put th...
It's the one before the Service Menu. I only realised a few weeks ago that my system has been on Winter time most of the summer!
Not sure about the warranty, but they are purchased separately and use a number of individual fans so probably could be repaired easily. See I ...
EPCI charged £12k after the grant for a 14kW system - so not cheap, as you say. I did the Jaga rads separately and in 2 stages because we wanted mak...
Jaga is a Belgian company. I ordered mine through Gogeothermal but the price you quote is about right with the DBH fan units installed (you can have ...
I didn't because the survey (also done by Regenertec) didn't recommend any radiator changes - and I was planning to install Jaga fancoils anyway, to a...
@grahamf EPCI subcontracted the installation work out so maybe I got a different team. Anyway there were 4 of them and they worked hard over 4 days t...
@jords thank you for an informative description of your ASHP investigations. I've had a Mitsubishi Ecodan installed for just over 2 years now and am ...
Latest Posts
-
RE: A2A vs A2W: Which Heat Pump Would You Pick?
Good questions @temperature_gradient. My understanding ...
By springswood , 6 seconds ago
-
RE: Estimating true heat loss from twelve months of consumption data
Hi @ian33a you could do your own heat loss calculation ...
By Judith , 8 hours ago
-
RE: Anyone concerned about GivEnergy?
@sunnyskies I agree with Downfield trying to ask the GE...
By Judith , 9 hours ago
-
RE: Setback savings - fact or fiction?
@jamespa — this version may be marginally better: &nb...
By cathodeRay , 11 hours ago
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
All going according to plan, mid July we get that 7kW a...
By Batpred , 11 hours ago
-
Current metrics - DHW target set to 47c
By TaffontheTaff , 16 hours ago
-
RE: My Grant R290 9kW Heat Pump Installation
@petch I'm very sorry that I have not picked up your po...
By GrahamF , 18 hours ago
-
RE: Samsung gen 7 HP 12kw - auto control issue and water law
Suggest you have a trial with Havenwise app. I have th...
By Broadsman , 20 hours ago
-
RE: New Solar, Batteries, Air Source and Under Floor Heating advice please
You’re right: UFH works best with high-conductivity fin...
By bafab , 23 hours ago
-
RE: DIY or Don’t Touch? Solarman Smart Meter Install
That was my understanding also.
By JamesPa , 23 hours ago
-
RE: Grant Aeona 3 R32 cycling with weather compensation.
That would be abnormal but I cant see from your charts ...
By JamesPa , 23 hours ago
-
RE: Vaillant Sensocomfort Time
Oh I remember this from when I set mine up 2 years ago,...
By JamesPa , 1 day ago
-
Heat geek have already stated that the pro is in fact c...
By JamesPa , 1 day ago
-
RE: The Myth of the MCS Performance Guarantee
@editor I know. As if MCS wasn't bad enough, it's now e...
By Deltona , 1 day ago
