Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
Are your problems now resolved? Feedback is beneficial for other forum members.
Why is the IAT always missing from the graphs?
Look at the LED's on the pump controller, or post a close-up photo if you are not certain how to interpret their meaning.
Looking at the schematic, this is how I suspect your system will be operating at the moment, though please correct any incorrect assumption I may have...
@leftbacks Thank you for providing the detailed schematic and photo's. The only comment that I would make is that I think the ESBE valve is a 3-port...
@cathoderay So the LWT calculated by the simulation will probably need to be increased by 7.5C, to accommodate the probable 5C temperature drop acro...
Since numerous people have tried to resolve the issues with your system and appear to have failed, I suggest that we go through your system step by st...
@cathoderay One thing that I did not do on this spreadsheet is accommodate the LWT to RWT Delta T, which should increase the calculated LWT value by...
@cathoderay The actual spreadsheet was created quite some time ago and is quite basic compared to some more recent ones. You are on the right trac...
I found a mistake in the body of the table in cell J29, the value should be 5841 not 11616. Sorry about that, one of the pleasures of growing older. ...
@cathoderay I suspect it may be the time delay as the heat emitters warm up. Once all the heat emitters have warmed up they will not be absorbing as...
@cathoderay The Heating Demand value in cell C1 should be the calculated heat loss for your home at the specified OAT detailed in cell E1. Cell H1...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Plug and play solar. Thoughts?
Impressions so far from the one I've installed are that...
By EtchedPixels , 1 hour ago
-
-
@batpred The Daikin temperature probe protrudes from th...
By Toodles , 5 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
@editor And as an occasional contributor, may I say wel...
By Toodles , 7 hours ago
-
RE: Should Households Who Can Afford It Pay More for Energy to Help Those Who Can't?
They don't have to try. Our entire system is d...
By EtchedPixels , 7 hours ago
-
RE: Why don't people choose heat pumps?
Fair enough. I guess I was thinking of pipes that run ...
By JamesPa , 7 hours ago
-
RE: How Can I Prove Coal Was My Main Heating Source Without Receipts?
Got excepted for the grant now so thanks for the replie...
By Chilli304 , 11 hours ago
-
Daikin Altherma 3 R F+W, room thermostat control, weath...
By JanHarley , 12 hours ago
-
RE: Buffer tank on a 2 x 14kw Ecodan system
Pretty much as I had guessed in my crude scaling from m...
By JamesPa , 15 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
Well you have a vibration generator running at some fre...
By bobflux , 1 day ago
-
RE: Who's your electricity provider and what's your tariff?
@downfield Thats a decent rate, I’m shocked they hadn...
By Papahuhu , 2 days ago
-
RE: Adventures in heat loss calculations
@toodles thanks! So as suspected, around a doubling of ...
By SusannaSaunders , 2 days ago
-
Six books in three years and I think I’ve now covered j...
By Mars , 2 days ago
-
RE: Grant Aerona3 13kw - Buffer Tank - Heating Journey
@heymikey Well done in achieving as nearer a match acro...
By Toodles , 3 days ago
SPONSORS
