Last seen: Sep 19, 2024
@marzipan71 Hi Steve, 300 Euros seems rather expensive for an immersion heater, which normally appear to be in the £35 to £50 range in the UK. Do ...
@marzipan71 Hi Steve, The power diverter does not need to be near the electricity supply meter, but it does have to be in reasonably close proximi...
@jennyross Did you get a power diverter installed?
So if one bumps up one's usage, during the peak period, for the next couple of weeks during the none session days, it should soon be possible to achie...
That would seem about a normal level of usage, though if your fridge and freezer are still switched on, they could each draw 50W or more each when the...
@mjr Without knowing the actual details of how 'normal' use is to be assessed, it is difficult to be able to predict if the scheme could be open to ...
Considering the overloading possibility highlighted by Transparent, have you considered a smaller model? Transparent, if the SD6 can 'feather' its b...
@knukes Here is a video that anyone interested in wind turbines may find of interest. Unfortunately it would appear that they are not yet available,...
@benseb I would not get too fixated on the DeltaT reading, which may not be correct anyway. As Alec has pointed out, concentrate more on how your sy...
@knukes Looking at the data, it would appear that the indoor temperature increases naturally during the afternoon due to solar gain, which is to be ...
Hi Knukes, welcome to the forum. Much depends on the rate of heat loss at your home and its thermal mass. One thing that you could try is to raise ...
- 26 Forums
- 2,418 Topics
- 54.8 K Posts
- 209 Online
- 6,098 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Ecodan Pump Issues… Circulation pump turns off when heat pump compressor turns off
@jamespa sorry James, yes larger surface area, messing ...
By ASHP-BOBBA , 7 hours ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
In the Home Assistant firmware the data points...
By F1p , 7 hours ago
-
RE: GSHP WOES! Midland based engineer recommendations?
@johnbroome if it is not the pressure in the expansion ...
By ASHP-BOBBA , 7 hours ago
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
In recent cold weather th...
By JamesPa , 8 hours ago
-
So I hear the export MPAN that UKPN assigned should be ...
By Batpred , 10 hours ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
From what I read, the Solis has a very long list of err...
By Batpred , 11 hours ago
-
RE: Ideal HP290 14kW ASHP - how to optimise
Roughly this should cost you £250-£300 per peak month a...
By ASHP-BOBBA , 12 hours ago
-
RE: New Daikin 11kW Altherma 3M install - is it working as it should?
@toodles Thank you for your input. As the days have got...
By Synthbuilder , 15 hours ago
-
RE: Fan unit Making terrible noise HELP!!
@gutoffowc Oh no, sorry to hear that, are you in the Ke...
By ASHP-BOBBA , 17 hours ago
-
RE: Sunsynk Whole House Backup Issue
@sheriff-fatman - could you please re-post that in the ...
By Transparent , 18 hours ago
-
RE: Running my new Nibe ASHP efficiently
I didn't. I spent a while manually messing around with ...
By jamieheatpumpnew , 19 hours ago
-
RE: I’m glad the cold spell is over!
I comparison with the 65kWh used above yesterday was on...
By Judith , 20 hours ago
-
RE: Octopus Cosy 12 Heat Pump Regret: Incredibly Loud, Poor Heating & Constant Hum - Help!
I should think so, I thought that pretty much universal...
By JamesPa , 20 hours ago
-
RE: Setback savings - fact or fiction?
I'm also inclined to look into how a defrost is actuall...
By cathodeRay , 21 hours ago
-
MLCP (Multi-Layer Composite Pipe) for ASHP
@editor nope. The info you reported was sufficient for ...
By iotum , 1 day ago
-
RE: Experience - New Build / Complete New Heating System
@vincro I would be surprised if it is much above 5 to 6...
By ASHP-BOBBA , 1 day ago
-
RE: Post-Traumatic Heat Pump Stress Disorder
Yes bang on and maybe I can illustrate that by way of e...
By iotum , 1 day ago
-

