Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
The above standard philosophy for gas boilers is probably one of the reasons for the existing problems with some of the present heat pump installers. ...
@jamespa To save causing even more confusion to any prospective heat pump purchaser, I think that it would be useful to clarify certain points. Ba...
Could you not ask Elite again, or ask them if they could recommend a suitable company. If that fails Ecobubl appear to have a good reputation, or try ...
@jeff Our car is zero emissions for most of the time, it just sits on the drive emitting 'zeros'. Fortunately my wife sweeps them up and puts them i...
As suggested previously, a possible way to reduce cycling frequency could be as follows- Try setting the warm end of the WC curve to LWT of 25C at O...
@fazel Thank you Fazel, useful information.
I'm pleased to read that you 'stuck to your guns', it is the only way to get poor installers to improve their game.
Our A2A heat pump still performs defrost cycles when the OAT is quite mild, it is more to do with humidity rather than OAT. Whilst it's indeed p...
@jamespa What was even more interesting was the article stating that Ofgem are at last tightening the rules around the balancing mechanism, to try t...
@bontwoody I also don't claim to be a heat pump engineer, but we probably know as much, if not more, about heat pumps than many of those who do clai...
@bontwoody It sounds that you are contemplating becoming 'bad consumers' like me. Please remember that the Chinese economy will collapse if you all ...
@toodles My son called recently to ask if I would provide him with a reference code so that he could switch to Octopus and we would both be credited...
- 27 Forums
- 2,751 Topics
- 64.7 K Posts
- 1,741 Online
- 7,158 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Switch suitable to change between two inverter CT's
It depends An unloaded current transformer can output...
By bobflux , 10 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@batpred They offered both, I went with Pro. As an amat...
By baroquebank , 20 hours ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
@penval, really useful update. After all the discussion...
By Mars , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 3 days ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
D'oh - of course. I shouldn't post before my brain is f...
By Old_Scientist , 3 days ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 3 days ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 3 days ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 3 days ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 4 days ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 4 days ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 4 days ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 5 days ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 5 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 6 days ago



