Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jul 30, 2026
I have just installed another string and now doubled my solar to 4.9 from the registered original 2.6. Currently output is around 4kwh, do I need to ...
@majordennisbloodnok good advice, thanks for that.
@colinc my panels were installed two years ago and I clean them twice a year, but only because I have easy access. I use water initially with hand so...
I clean mine a couple of times a year, they do get dirty. At the moment the farmers are working in the fields and it’s all laying on the panels. It’s ...
That’s the solar up and running, I don’t think it’s the most attractive addition to my property but very practical. It’s all bolted down and the tubs...
@transparent thank you. Be Thursday before my mate gives me the crimping tool so a couple of days off
@transparent so just in case I am stupid. If the string of panels begins with a positive plug that would go to the positive on the inverter. And likew...
@transparent the panels are 1.9 landscape. I fitted the boxes 1.5 metres from first row. That should be fine I think
@transparent I went and got new connectors the same as the ones on the panels, I was just adding problems for myself. I had to go and get glands for ...
Got myself in a pickle. I have two types of plugs, but enough to change the two last ones, negative and positive on the panels. Can anyone explain wh...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
@old_scientist Have you ran the numbers as to which ...
By Papahuhu , 42 minutes ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
D'oh - of course. I shouldn't post before my brain is f...
By Old_Scientist , 2 hours ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 4 hours ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 4 hours ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 5 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 22 hours ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 22 hours ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 2 days ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 2 days ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 3 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 3 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 3 days ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 4 days ago
SPONSORS
