Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Mar 2, 2025
Ah, that's amazing. Thanks for the answer. At least I know something isn't faulty. That would also explain why it doesn't do it in the summer when the...
@catapult schedule overides the water heating. Mine heats up once for 1.5 hrs (often doesn't take that long) at 3am on our cheaper rate electric. When...
@robl it definitely is.
@catapult my flow temp is 28-31 normally and that sits me at 18-19 degrees 24/7 all on rads. I'd imagine you should be much lower than that with under...
Well ours was on an Eco4 grant so they definitely just slapped it in and legged it. 😩🙄
@catapult just on flow rate I believe the aim is 2 x the KW of your system so 16 x 2 =32 so you are thereabouts. Although I've actually turned my flow...
@catapult I'm not really sure if you can see how often the hot water turns on. Mine has always been on a schedule. Schedule is dead easy to set up....
No problems on the questions. 😎 It took a while to get anywhere with this. I wish they could make them more simple. In Schedule (accessed by pressi...
@editor honestly, I'm considering redesigning the house so I can fit a chair by the UVC to watch the figures and fiddle with the settings. 🤣🤣
Well, last night I decided to try and set the temperature back overnight. I haven't got around to working out the programming on the room stats yet so...
Okay, thanks. I'm not sure I can go much slower on the pumps. 24l/pm now with both pumps on middle speed. Not sure how I can make the temps further ap...
- 27 Forums
- 2,763 Topics
- 65.1 K Posts
- 1,764 Online
- 7,169 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
Vaillant Arotherm Plus 7KW need a service on it
looking for a service to be done on my heat pump, im ba...
By AdamK , 55 minutes ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 3 hours ago
-
RE: Vaillant Aurotherm - Heater Wire Position
Ah, good point. I need to check if this was installed i...
By Batpred , 8 hours ago
-
RE: Adventures in heat loss calculations
Posted by: @jamespa At this point its probably worth...
By Rob of York , 10 hours ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 20 hours ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 1 day ago
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay @jamespa I've managed to get some nice re...
By Rob of York , 2 days ago
-
RE: 7kW EV Charger Options Advice
Doh, not sure that I was thinking straight there, less ...
By Rusty , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
I’m really liking reading through this thread and the r...
By Judith , 2 days ago
-
Thank you @trebor12345
By rgabor , 2 days ago
-
Panasonic Free Multi Z and Etherea Internal units.
My prospective installers have suggested the Panasonic ...
By Toodles , 3 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Great. You just need to find a way of cranking up your...
By JamesPa , 3 days ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
We had two heat pumps installed without Govt funding. H...
By Rob of York , 3 days ago
-
My Adapt is finally installed and running! Almost a yea...
By tomasmcguinness , 3 days ago



