Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 16, 2026
@eliuccio I have a 5kW Samsung and am very happy with it. Vaillant have a good reputation too. It would be useful to have some more details on t...
Its similar here in Pembrokeshire, perhaps a little warmer than last winter.
@bobtskutter A significant number of us have Bob. see thisalso look up Glynn Hudson on Youtube
@richard24738 Thats what I wasnt too sure about but I would imagine that as the water heats up it expands and increases the pressure. If it gets too l...
I believe it should read just above one. it may indictate a slow leak or air in the system. I would top it up a bit and monitor it.
@triggers41 I have a Gen 6 and run it very successfully using the Samsung controller. You can see my stats in the link below as @old_scientist s...
@transparent I could be wrong but I think the meter measures generation not export so it should be obvious to anyone looking which installations have ...
@transparent That was my initial thought too, but it’s a pretty elaborate one. As it happens the solar panels aren’t owned by him it’s a rent a roof s...
@wesleyp1874 The microbore wont change the temperature of the radiator, but it could mean that you have to run the heating water hotter than if larger...
@wesleyp1874 I seen a few ECO4 installations now and it really is pot luck. As you say a lot of the work is often subcontracted and how well that is m...
Thats a very competitive tariff! better than Octopus intelligent Go. The only downside for me is that I would lose the 15p per kWh export tariff. Curs...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
Looks like not much change in electricity prices in the...
By ChandyKris , 51 minutes ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 1 hour ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 1 hour ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 2 hours ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
I think this calculation goes the other way. 3.54kW ga...
By JamesPa , 3 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 19 hours ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 19 hours ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 2 days ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 2 days ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 3 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 3 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 3 days ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 4 days ago
SPONSORS
