Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Winter over? How cold was it compared to last winter?
Now we have seen the back of Metrological Winter does anybody know how cold it was compared to last year, I have only had my heat pump since March so don't have any figures to compare for last year. It would also be good to know if November had average temperatures or not
Posted by: @potatomanNow we have seen the back of Metrological Winter does anybody know how cold it was compared to last year, I have only had my heat pump since March so don't have any figures to compare for last year. It would also be good to know if November had average temperatures or not
Its similar here in Pembrokeshire, perhaps a little warmer than last winter.
House-3 bed partial stone bungalow, 5kW Samsung Gen 6 ASHP (Self install)
6.9 kWp of PV
10kWh DC coupled battery
Blog: https://thegreeningofrosecottage.weebly.com/
Heatpump Stats: http://heatpumpmonitor.org/system/view?id=60
In draughty NE Scotland the monthly average temperatures for 2023/2024
Nov 23 5.2C, Dec 23 4.5C, Jan 24 3.2C, Feb 24 5C = 4.4C
2024/2025
Nov 24 5.7C, Dec 24 5.7C, Jan 25 2.9C, Feb 25 4.3C = 4.6C
Very slightly warmer...not that you would notice!
- 27 Forums
- 2,768 Topics
- 65.2 K Posts
- 1,959 Online
- 7,172 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Why are ASHP installs so expensive?
@batpred I take your point and, perhaps, your experienc...
By ian33a , 9 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@batpred When the raw material input has increased in c...
By Papahuhu , 1 day ago
-
We kept ours and Heat Geek would have been in touch if ...
By Batpred , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
The Heat geek contract had various get-out clauses with...
By Batpred , 2 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s I would encourage you to have a conversation ...
By Rob of York , 2 days ago
-
RE: Is it the house or the equipment?
Thanks @jamespa The last hard to fix draughts in the...
By springswood , 2 days ago
-
RE: Vaillant Arotherm – Using Heating
@l8again Mine is typically using 11w including the i...
By Batpred , 2 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you have a flowmeter and two temperature probes, the...
By bobflux , 2 days ago
-
RE: Siting of the external sensor on a heatpump
@jamespa Absolutely. Even if the same mistake was mad...
By Batpred , 3 days ago
-
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
In fairness all heating has cost a lot to run in recent...
By JamesPa , 3 days ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 5 days ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 5 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 6 days ago




