Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 30, 2025
@derek-m I think you're referring to the one time president of IBM, Thomas Watson who said there was a world market for maybe five machines. Its why I...
Maybe i could use the 3 panels wide space that i have left on roof to install thermal, and that heats the hw cylinder, and then boost it at night to e...
@duncan-mac I’m 53 and remember doing some FORTRAN and COBOL in the Army back in 83. I learnt BASIC as part of my city and guilds back then too. there...
@derek-m Rasp PI have launched the Pico which i think is the same type of thing for like £3 or something !
Yeah they just kept saying click this link and keep checking but they then say as your registered your interest then why would i need to keep checking...
@chris-in-kemnay i was thinking about a small wind generator especially where i live (right on the coast). Not sure about potential noise or if there ...
I was watching a YouTube video on that very subject the other day (sorry can find the link) but it more or less said just cover your house with PV as ...
@duncan-mac thats very kind of you to say, but we are never to old to learn and try something new, that is what life is about ! If you dont do it then...
Ive had a good day so far, my solar panels say on the enphase that I produced 22.1kWh but on my inverter it says 19.2kWh yeald. I filled my 4.8kWH bat...
@derek-m Im going back and forth on this, do I just do cavity wall fill with Blown bead or do I leave it and do whole house internal wall insulation. ...
I would think maybe its an automated response about the high number and when you send the photo they should accept it.
I think the problem is with some positions within local government is that the person believes they actually have authority over you and that they are...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you are considering phasing the project, then I woul...
By GrahamF , 2 hours ago
-
RE: Siting of the external sensor on a heatpump
Of course had the heat source been a heat pump it would...
By JamesPa , 4 hours ago
-
Never assume, it makes an ass of u and me! OK, tha...
By JamesPa , 4 hours ago
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
In fairness all heating has cost a lot to run in recent...
By JamesPa , 6 hours ago
-
RE: Is it the house or the equipment?
@springswood We have two Daikin single split A2A syst...
By Rob of York , 7 hours ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 1 day ago
-
No, but the heat pump must be capable of delivering a S...
By JamesPa , 2 days ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 2 days ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
booked it with Vaillant. will use them until i can find...
By AdamK , 2 days ago
-
RE: Adventures in heat loss calculations
I have seen it stated that the declared calorific value...
By JamesPa , 3 days ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 3 days ago
-
RE: Vaillant Aurotherm - Heater Wire Position
Ah, good point. I need to check if this was installed i...
By Batpred , 4 days ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 4 days ago
SPONSORS
