Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 26, 2026
Just wanted to share some info for anyone facing challenges with Fogstar SEPLOS BMS battery kits. The manufacturer has very clear "fixing instructions...
It makes sense the gov will need to shift taxes from electricity to gas. But if they reduce the BUS incentive, what seems to be a growing heat pump ...
Would 'foreign investment funds' always translate to foreign money, I wonder.. Ok, the point I tried to make is that consent is often refused for ...
I cannot stop thinking... what sort of Air con unit costs 2500 to supply and install? This may be a good solution for example for a one bed flat.. b...
I agree, the operation of a system managing hundreds of thousands of consumer hosted batteries would entail lots of effort and so cost managing contra...
From what I see, the work to upgrade the cable, etc all the way to your meter is safety related and UKPN is the only one handling this. This wou...
That's sounds great. I have no ASHP, but 15kwh storage. I am considering moving away from Agile to the EV tariff during the winter months...
Locked environments are difficult to manage, it also means features may not vbe made accessible since it depends on the installer being familiar with ...
I found this to be the case, even without an ASHP. Curious on your thoughts on my hybrid inverter and experience with the battery.
It makes sense to me. LDES would reduce the dependency of the grid on fossil fuel sources during long periods of no wind, low PV production, therefore...
Ah, it seems PACE BMS are easy to source on AliExpress, various models from £14 to £120, I am not sure which model Fogstar supply. Reading this thread...
I am not sure who got the wrong end, after the two or three months debacle.. We are all always very polite. In any case, I added a comparison of opt...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 12 hours ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
Sooooo, what did we do in the end? We approached three ...
By Penval , 12 hours ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
D'oh - of course. I shouldn't post before my brain is f...
By Old_Scientist , 17 hours ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 19 hours ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 19 hours ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 20 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 2 days ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 2 days ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 2 days ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 3 days ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 3 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 4 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 4 days ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 4 days ago
SPONSORS
