Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Oct 5, 2026
Yes, it was a very reasonable payment. Less than 10% of the £3200 the full MCS service would have costed us (of course not directly comparable)! ...
I acknowledge I have not been consistent in all previous posts! The reason I followed your post mentioning rcd and RCD with the definitions BEAMA (...
This query is best answered here @jancold , as it seems many people purchased Solis inverters to use with Seplos batteries. I merely used timed dis...
No as the temp readings are not the same.. And additionally the JK BMS may need a quiet period before doing its job. Will need to study this a ...
Thanks, I made some adjustments as per yours and @transparent advice, to slow the charging rate as it approaches 100% (since I have not tried to use a...
I had a note about import, but my IOG is fixed at 7p overnight (+ standing charge of 15 quid a month..). Export is Agile but every time I check, it is...
I saw kits already on sale in the UK. Not comparable, but 800W panels with an 800W waterproof microinverter and fixings, all for £400. Tempting. I won...
Yes, the common practice here seems to be for the term RCD to mean an RCCB while the term RCBO (that also includes current over protection) i...
I agree, I doubt that Germany regulators would have insisted on special types of RCDs without a good reason (and there would not be any before the spr...
All that is being done is the inverter is set to stop charging when soc reaches 100%. This battery has a JK balancer, I just use the default values...
This discussion started elsewhere but may fit better here.. I am as puzzled as @jamespa about what could have led to a decision in the UK to effe...
This is what my seplos is showing along the day. The readings are direct from the BMS. So as expected, there are significant drops in voltage during...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: DIY Heat Pump Installations: Navigating Legal and Regulatory Hurdles
I'd be surprised if it wasn't a noise consideration. Ne...
By Majordennisbloodnok , 10 minutes ago
-
RE: Indevolt Batteries UK Support & Info Thread
I've got a podcast recording scheduled this week where ...
By Mars , 12 hours ago
-
RE: Renewable Heating Hub Homeowners' Q&A Podcast
I’m a little late posting this, but it’s genuinely one ...
By Mars , 12 hours ago
-
RE: How should the Boiler Upgrade Scheme be reformed?
Ah, that makes sense when a combi is in place. The boil...
By Batpred , 15 hours ago
-
RE: Replacing Storage Heaters with a Heat Pump in a Stone Cottage
@bobflux Thanks, that gives me something to check the i...
By Paul1098 , 15 hours ago
-
RE: Tesla Powerwall (2) Calibration Cycles
For Powerwall calibration, avoid forcing repeated deep ...
By EnergyStorageTech , 1 day ago
-
Over the years, due to the non barrier PEX underfloor h...
By bobflux , 1 day ago
-
RE: Getting closer to a finished Haier system
All the 45° elbows required for getting the primaries i...
By Singlespeed , 2 days ago
-
RE: battery storage without solar
Indeed, current on the grid input = current used for ch...
By bobflux , 3 days ago
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu @papahuhu A lot of tears and sweat went into ...
By Andris , 3 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
We have the same problem, 12 mature trees clip the morn...
By Papahuhu , 4 days ago
-
RE: Solis inverters S6-EH1P: pros and cons and battery options
I had a battery and inverter installed a while ago, my ...
By Batpred , 4 days ago
-
RE: Is This Initial Free Quote From Octopus Trusted Partner Reasonable?
@ltron2 The EPC on our house is A-92, however that i...
By Rob of York , 4 days ago
-
RE: Heat pump branding. Clever, contemporary… or a bit too much?
The layout is confusing - much better like this: We b...
By downfield , 5 days ago
-
RE: Is it just me, or does tradesperson timekeeping and communication drive you absolutely mad?
My experience, backed up by opinions from various frien...
By Majordennisbloodnok , 5 days ago
SPONSORS
