Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: May 16, 2026
If the heatpump manufacturers app does not show it, you could use a ct clamp or a smart switch. Most provide that information via their app.
Why do they not get replaced by NICEIC, assuming they want to get into it? I found that they are effective. Perhaps what they regulate is not as compl...
I do not, and I do not have a heat pump! It seems to allow an SG-Ready heatpump to be controlled via some special ports. There is an optional "smar...
What abernyte proposes here is just using a generator to run a backup fossil fuel boiler. A heatpump will always need more electricity.. Your back...
@rusty I had a look, got tired after 11 of the 38 or so questions. To be honest, most questions seem sensible. They do not seem to pay much atte...
This is all very interesting! I wish Solis would make sure that during the first couple of weeks after an account is configured on Soliscloud, they...
This is interesting, I think @transparent suggested there could be a method to get the DNO to upgrade the supply upgraded to three-phase on safety gro...
The octopus export is now working, with the non mcs non flexiorb process. There was some delay as they are asking for a building control certificat...
One thing you may want to do is to get Solis to check your usb datalogger firmware and maybe get Solis to upgrade it. They upgraded mine a month or...
You seem to have a three phase supply, but I am guessing this is not a before and after set of photos? Do you mean the EV charger works but the apps...
Just wondering if Octopus fit your EV charger or also the PV? One CT clamp seems to be unused but perhaps it is not needed? If the goal is just to ...
@bash I raised a ticket with Solis and they increased the frequency of the data upload to soliscloud for my inverter to once a minute. After a mont...
Latest Posts
-
RE: Setback savings - fact or fiction?
Great. I will try to zoom in to work out the deltas be...
By JamesPa , 9 hours ago
-
RE: Sizing an ASHP; Heat loss and kW
You can't measure heat loss with an app. But you can g...
By JamesPa , 11 hours ago
-
I was directed to this app for my growatt system and no...
By David999 , 11 hours ago
-
RE: Estimating true heat loss from twelve months of consumption data
@ian33a — I have a sort of residual interest in this pr...
By cathodeRay , 12 hours ago
-
Hi, Thank you. So its a Daikin Altherma 3M...
By Lbart68 , 15 hours ago
-
I have a Contactum CU. Would the below RCBO (descriptio...
By Batpred , 16 hours ago
-
RE: Samsung gen 7 HP 12kw - auto control issue and water law
@chainreaction Agree with @broadsman , it seems many ...
By Batpred , 17 hours ago
-
RE: Anyone concerned about GivEnergy?
@transparent Thank you and appreciate your timely reply...
By SUNNYSKIES , 17 hours ago
-
RE: Grant Aeona 3 R32 cycling with weather compensation.
The hot water heating looks normal. The heat transfer ...
By GrahamF , 23 hours ago
-
RE: A2A vs A2W: Which Heat Pump Would You Pick?
Good questions @temperature_gradient. My understanding ...
By springswood , 1 day ago
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
All going according to plan, mid July we get that 7kW a...
By Batpred , 2 days ago
-
Current metrics - DHW target set to 47c
By TaffontheTaff , 2 days ago
-
RE: My Grant R290 9kW Heat Pump Installation
@petch I'm very sorry that I have not picked up your po...
By GrahamF , 2 days ago
-
RE: New Solar, Batteries, Air Source and Under Floor Heating advice please
You’re right: UFH works best with high-conductivity fin...
By bafab , 2 days ago
-
RE: DIY or Don’t Touch? Solarman Smart Meter Install
That was my understanding also.
By JamesPa , 2 days ago
