Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: May 15, 2026
I suspect a large percentage of insulation jobs were carried out under the ECO4 scheme, so perhaps this fits here. One thing I can add is that when...
Thank you for sharing and glad to hear you are happy and it works as you expected. I also have a Vaillant (gas boiler) and I agree the manuals tend...
@toodles There´s obviously a pattern here with VM being the last provider most of us had! Appalling when anyone just walks off without explainin...
@majordennisbloodnok It is not about being wrong or not. To some extent, there could be a commercial angle to not facilitating the use of third p...
I agree completely, but we see very little DIY on ASHP installations. As you are doing a very significant upgrade, you can consider disruptive work...
@editor It makes sense that installers are trying to reduce the overall cost of sales by using these approaches to re-risk and monetise. The free e...
@majordennisbloodnok I understand your point, I agree that should an ISP be taking that path of restricting access, that would be anti-competitive, et...
I had occasional problems with virgin but I found the service very reliable overall. My main problem was with the way they pushed to remove the rea...
You are I suspect "on the money" when you mention MCS: I asked for a PV quote. I stated exactly what I have and what we need. After being asked (and d...
I understand what you say.. And it seems that I had a similar experience to yours, but with VM! So I now have a router that takes a sim card, just i...
Makes sense to me and we all had cases where even if a product stops being supported by a manufacturer, it is still usable. When a product stops bei...
@majordennisbloodnok The best solution is surely going to be that the manufacturers provide options to extend the support. The DNO will ultimately ...
Latest Posts
-
RE: Setback savings - fact or fiction?
Great. I will try to zoom in to work out the deltas be...
By JamesPa , 1 hour ago
-
RE: Sizing an ASHP; Heat loss and kW
You can't measure heat loss with an app. But you can g...
By JamesPa , 3 hours ago
-
I was directed to this app for my growatt system and no...
By David999 , 4 hours ago
-
RE: Estimating true heat loss from twelve months of consumption data
@ian33a — I have a sort of residual interest in this pr...
By cathodeRay , 4 hours ago
-
Hi, Thank you. So its a Daikin Altherma 3M...
By Lbart68 , 8 hours ago
-
I have a Contactum CU. Would the below RCBO (descriptio...
By Batpred , 8 hours ago
-
RE: Samsung gen 7 HP 12kw - auto control issue and water law
@chainreaction Agree with @broadsman , it seems many ...
By Batpred , 9 hours ago
-
RE: Anyone concerned about GivEnergy?
@transparent Thank you and appreciate your timely reply...
By SUNNYSKIES , 9 hours ago
-
RE: Grant Aeona 3 R32 cycling with weather compensation.
The hot water heating looks normal. The heat transfer ...
By GrahamF , 15 hours ago
-
RE: A2A vs A2W: Which Heat Pump Would You Pick?
Good questions @temperature_gradient. My understanding ...
By springswood , 17 hours ago
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
All going according to plan, mid July we get that 7kW a...
By Batpred , 1 day ago
-
Current metrics - DHW target set to 47c
By TaffontheTaff , 1 day ago
-
RE: My Grant R290 9kW Heat Pump Installation
@petch I'm very sorry that I have not picked up your po...
By GrahamF , 1 day ago
-
RE: New Solar, Batteries, Air Source and Under Floor Heating advice please
You’re right: UFH works best with high-conductivity fin...
By bafab , 2 days ago
-
RE: DIY or Don’t Touch? Solarman Smart Meter Install
That was my understanding also.
By JamesPa , 2 days ago
