Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: May 15, 2026
From this table, I understand the following is needed in sequence to feed the heatpump: the fuse/mcb is characteristic C - so C curve the rcd is...
I suppose electricians prefer to have a consumer unit of the same brand as the RCBO. But if an EICR is carried out, if a different brand was used, thi...
Similar to what we do with the EV tariff, where we concentrate consumption overnight.. And it seems that in the Cosy case, it could also be that uti...
Thanks for confirming. I should have suspected "C16" (instead of "B16") would mean C curve on Lewden´s! 🤭 This Vaillant requires at least C, s...
@trebor12345 It's not marked if it is the required c or d curve. If it is b curve, it may cause nuisance tripping more easily. The electrician shoul...
Still on the agile costs.. Distribution costs in Yorkshire are similar to London´s. I wonder how that is achieved, or is it not the case that Yor...
I am aware. But is your chart direct from a Pace BMS app? I managed to set the parameter on my JK balancer. The iphone app worked after resetting th...
When TrustPilot accepted an appeal from a product manufacturer claiming I had not shown proof of purchase (I bought from a retailer), I started having...
My conclusion was that the Solis (via Soliscloud but also using local modbus) is not reporting the raw power, there´s some sort of moving average type...
Yes, below are the projected figures from just three years ago... There´s no risk of moving too slowly to build.. 😀 That Guardian article...
That´s a great idea.. But I also wanted to share some simple analysis. I was trying to investigate Agile pricing and specifically why there are di...
Thanks, this is what I referred to. Good question on the peak that the curve for dwellings with a heat pump in the middle of the day, could this be du...
Latest Posts
-
Hi Welcome to the forums and please be assured that n...
By JamesPa , 6 minutes ago
-
I have a Contactum CU. Would the below RCBO (descriptio...
By Batpred , 26 minutes ago
-
RE: Samsung gen 7 HP 12kw - auto control issue and water law
@chainreaction Agree with @broadsman , it seems many ...
By Batpred , 1 hour ago
-
RE: Anyone concerned about GivEnergy?
@transparent Thank you and appreciate your timely reply...
By SUNNYSKIES , 2 hours ago
-
RE: Setback savings - fact or fiction?
@cathoderay thanks for your kind response; our cat does...
By PeterWurmsdobler , 2 hours ago
-
RE: Estimating true heat loss from twelve months of consumption data
@ian33a — a measured heat loss always trumps a calculat...
By cathodeRay , 5 hours ago
-
RE: Grant Aeona 3 R32 cycling with weather compensation.
The hot water heating looks normal. The heat transfer ...
By GrahamF , 8 hours ago
-
RE: A2A vs A2W: Which Heat Pump Would You Pick?
Good questions @temperature_gradient. My understanding ...
By springswood , 9 hours ago
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
All going according to plan, mid July we get that 7kW a...
By Batpred , 21 hours ago
-
Current metrics - DHW target set to 47c
By TaffontheTaff , 1 day ago
-
RE: My Grant R290 9kW Heat Pump Installation
@petch I'm very sorry that I have not picked up your po...
By GrahamF , 1 day ago
-
RE: New Solar, Batteries, Air Source and Under Floor Heating advice please
You’re right: UFH works best with high-conductivity fin...
By bafab , 1 day ago
-
RE: DIY or Don’t Touch? Solarman Smart Meter Install
That was my understanding also.
By JamesPa , 1 day ago
-
RE: Vaillant Sensocomfort Time
Oh I remember this from when I set mine up 2 years ago,...
By JamesPa , 2 days ago
