Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Mar 4, 2025
This event went ahead and we had a packed hall with around 45 people attending. This event illustrates the role and importance of grassroots practic...
Out of interest @jamespa did you need to adjust your WC heat curve setting at all?
Thank you @transparent for flagging this. I have now had the chance to take a look and I feel that there should be some sort of response from the con...
@clockworks @transparent wrt thermal inertia - the control parameter I mentioned which I have been tweeking for my own installation (see previous post...
Splendid, thank you @transparent 😉
@transparent - done
Spot on @clockworks @transparent - this is exactly why we have organised a local community meeting - this needs local community action, towards househ...
@clockworks I have reverse engineered my heat loss calc now that I have 18 months of actual performance data. My review is that the heat loss figure ...
Community Energy Plus cover your area - you could ask them?
@clockworks I don't know if this help .... We have a Stiebel Eltron WPL25AS (installed Aug23). I have also been looking at how to minimise cycling ...
I have just discovered that HeatpumpMonitor now shows 'compressor starts': HeatpumpMonitor.org starts & starts per hour - Hardware / Heatpump - ...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Why are ASHP installs so expensive?
@batpred I take your point and, perhaps, your experienc...
By ian33a , 3 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@batpred When the raw material input has increased in c...
By Papahuhu , 23 hours ago
-
We kept ours and Heat Geek would have been in touch if ...
By Batpred , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
The Heat geek contract had various get-out clauses with...
By Batpred , 1 day ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s I would encourage you to have a conversation ...
By Rob of York , 1 day ago
-
RE: Is it the house or the equipment?
Thanks @jamespa The last hard to fix draughts in the...
By springswood , 2 days ago
-
RE: Vaillant Arotherm – Using Heating
@l8again Mine is typically using 11w including the i...
By Batpred , 2 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you have a flowmeter and two temperature probes, the...
By bobflux , 2 days ago
-
RE: Siting of the external sensor on a heatpump
@jamespa Absolutely. Even if the same mistake was mad...
By Batpred , 2 days ago
-
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
In fairness all heating has cost a lot to run in recent...
By JamesPa , 3 days ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 4 days ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 5 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 5 days ago
SPONSORS
