Last seen: Dec 12, 2024
We keep using this word "independent" when referring to NESO. The Chair and CEO are appointed by the Government and regulated by OFGEM (another gover...
DHW temp loss is not at steep as 1C per hour. Overnight starting from 50C I usually see a 8C drop over about 12 hours.
That seems similar to that which I see on my system. The >60 flow temp is only sustained for around 15 mins before dropping steadily downwards. 14k...
Oh boy...you have really kicked the hornets nest! Not being able to receive a smart meter signal I have crunched the numbers, rather crudely compa...
Yes, you need the PAR-WT50 controller which speaks to the FTC5 via the PAR-WT51 receiver which is wire connected to the FTC5. You need both for this t...
If you use auto adapt and the Melcloud scheduling you can vary the target temperature across any period. I use it to set back for around 6 hours overn...
+1 for being positively gruntled
Mine has not missed a beat since installation in 2019 and is still using the original set of batteries. Have you set any form of schedule in Melcloud...
If you are to be draining the primary system then watch out if you have a glycol mix as the fluid. Not only is it messy stuff it is expensive...too e...
This years Buildings Insurance offering is with the AA who don't specifically include the heat pump but do define the buildings Fixtures and Fittings ...
From my experience of using the Mitsi wireless controller in auto adapt mode since 2019 it is the ultimate in fit and forget. It sits in the centre of...
Proportionally more of those are in the Northern Territory for which Arqiva holds the WAN licence. Glad to hear that Arqiva are still trying. I and ...
- 21 Forums
- 1,762 Topics
- 37.7 K Posts
- 88 Online
- 2,053 Members
Join Us!
Latest Posts
-
RE: Non standard houses with non standard owners
I remember watching a heat geek video about the effects...
By bontwoody , 34 minutes ago
-
RE: Samsung E911 intermittent issue
@netdonkey ok, So its sounds like the the Wilo is doing...
By ASHP-BOBBA , 1 hour ago
-
RE: Battery...Full house back up
@broadsman - I think you should also consider a partial...
By Transparent , 2 hours ago
-
RE: Samsung ASHP scheduling help
@morh does that samsung device connect to the HP or the...
By cyrusir , 3 hours ago
-
RE: Samsung heat pump has arrived with damaged fins – do I accept it or send it back?
Damage is cosmetic is appears, but the result of poor h...
By AllyFish , 3 hours ago
-
RE: Smart meter installation – seamless or a potential nightmare?
The incomer cable probably only has a size-rating once ...
By Transparent , 3 hours ago
-
RE: How Many ASHPs Work Correctly From Commissioning Date ( The resolution page)
Oh yes, I see, interesting that one of the 1st posts wa...
By ASHP-BOBBA , 3 hours ago
-
RE: Fitting heat pump plumbing and pipes in advance?
One more thought if you are doing a bathroom refurb and...
By JamesPa , 5 hours ago
-
RE: Fitting emitters with output greater than room heat loss.
The proof, of course, will be in the heating! My ASH...
By JamesPa , 5 hours ago
-
RE: Which system is most efficient...
OK. Im not going to be able to answer the question, bu...
By JamesPa , 5 hours ago
-
-
RE: Noise problems with newly installed Samsung 8kW ASHP
@lokisam I am following this with interest as I also ha...
By Odynsfee , 15 hours ago
-
RE: Mitsubishi Ecodan 11kw Defrosting Issue.
@thundermink can you give us an update on your tests?
By Mars , 17 hours ago
-
RE: Aira Heat Pump: Stylish Scandinavian Heating
@editor Yes, it's their "Aira Generation 1" 8kW model: ...
By trungdong , 18 hours ago
-
RE: Reducing heat pump vibrations through flat roof
@patrickvito Hi Patrick, thanks so much for taking the ...
By sten_super , 1 day ago
-
RE: Noise Issues with our Ecodan 8.5kW WM85VAA air source heat pump
@athlonoc Its unlikely the FTC is controlling a 3rd par...
By ASHP-BOBBA , 1 day ago
-
RE: Mitsubishi Ecodan Produced energy showing 'INVALID'
Hello! I tried your idea and disabled the cooling funct...
By sorin , 1 day ago
-
RE: What should we do with our Aga?
@RobinBennett We also have an AGA. Oil fired that we...
By Morgan , 1 day ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
@editor Many thanks Mars, this will be my Christmas rea...
By Odd_Lion , 2 days ago
-
RE: Anyone have experience with Clivet (Midea?)? And monoblocks vs Splits?
@benson Good to hear!
By bigvibes , 2 days ago
Latest Topics
-
Non standard houses with non standard owners
By jswhite 2 hours ago
-
By Jeff 6 hours ago
-
Which system is most efficient...
By bigvibes 2 days ago
-
What should we do with our Aga?
By RobinBennett 2 days ago
-
Reducing heat pump vibrations through flat roof
By sten_super 2 days ago
-
Fitting heat pump plumbing and pipes in advance?
By RobinBennett 2 days ago
-
By Broadsman 2 days ago