Recent Posts

| Forums | Topics

Page 38 / 60 Prev Next

Posts with their shortened content
	RE: Plate heat exchanger considerations By Scalextrix, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	As far as I can tell my vented system would have a peak pressure of about 0.5 Bar, which technically does meet the absolute minimum pressure of the ASHP (also 0.5Bar) specifications, but you are then ...
	RE: Wattson has landed! By Majordennisbloodnok, 3 weeks ago Forum Introductions, Forum Rules & Updates
	I must admit I detest AI for AI's sake, partly because it's not really true artificial "intelligence" and partly because the carbon footprint is so high for running the servers to support AI. However....
	RE: Plate heat exchanger considerations By JamesPa, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	They need to be switched on/off together. The pump rates may differ however. There is a bit of an science to setting up PHEs which I haven't fully understood yet; your installer should of course do ...
	RE: DHW SET UP with Samsung gen 5 By JamesPa, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@alfapat OK Im a bit stumped, but the good news is that someone in another thread has got it working (it may be a different generation but at least it gives a point of comparison), I have asked them ...
	RE: Plate heat exchanger considerations By Scalextrix, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Thanks, this is what I was thinking about, so as long as heat energy can transfer back through the PHE into the primary circuit during defrost, then that's fine. I suppose the secondary pump needs to...
	RE: Plate heat exchanger considerations By JamesPa, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	If it blows open a joint or a pipe you are correct of course. Perhaps more likely it will detect an existing slow leak due eg to a pinhole in a solder joint or even a pipe and the leak will be detect...
	RE: How not to install a heat pump By JamesPa, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	er, the plumber needs to revisit and do the job properly. "Never time to do it right, always time to do it twice!"
	RE: Air Changes per Hour - ACH and the MCS requirement By Declan90, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	There have been a few discussions dotted around (e.g. I think Urban Plumber had a video on YouTube) where the 8.4 kW is not accounting for defrosts, meaning that in our climatic conditions it will oft...
	RE: Feasible solutions to expand existing Sunsynk battery capacity By Sheriff Fatman, 3 weeks ago Forum Energy Storage

	RE: DHW SET UP with Samsung gen 5 By Alfapat, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Space heating is controlled by Danfoss thermostat and hasn’t been on as set to 20c and not needed . Here are my results , on the 10 Fsv’s only one needs noting as the rest is to do with room heating /...
	RE: Feasible solutions to expand existing Sunsynk battery capacity By ChandyKris, 3 weeks ago Forum Energy Storage
	@sheriff-fatman Good luck with the heat pump installation. That's exciting! What heat pump have you gone for? Please keep us posted on your heat pump installation journey.
	RE: Commencing on an ASHP Installation Process By Sheriff Fatman, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Just to briefly update things, we now have a confirmed installation date starting on 24th June, so things have moved rapidly from theoretical to 'this is happening'. I'm somewhat sceptical that they'r...