Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Feb 13, 2024
Depends on the CoP, for me, based on my tariff[s] I need to get above 3.4 right now to be cheaper than oil. Hence the need to get the installs done p...
Ultimately this will come down to the efficiency you can get out of the heat pump. Assuming a SCOP for a heat pump installed properly being round 3.7...
If someone has an oil boiler that does not need electricity and is thus exempt from the standing charge let me know 😀. I excluded it as this is a tax...
This should give you an idea. I think if you get a CoP of 3.9 or higher you are cheaper than oil, though depends on your price of electricity. ...
@lfranklin Crumbs, 12 is a bit cold for inside, esp if working from home. I found the following on this site but I can't find the information where ...
Where is your wired remote control unit located. If this is in an unheated space, this could be contributing to the problem. I see it was showing 12...
Your charts are only measuring electricity, how do you know how much of that is going to your heat pump? The timing of the spikes suggest a DHW rech...
That is your flow temperature, and seems quite high. The legionella heating cycle should only be once per week (or as you set it, mine is set to onc...
This is "point in time", but only when the outside temperature is -2.2 degC. This is the design temperature for your house. MCS Standard MIS 3005, r...
Awesome piece of work, especially from [what I think was] a standing start. Impressive CoP.
@derekdeleon I have the 16kW Samsung Gen6. As I was going to reuse my vented indirect solar thermal store, so I put in a heat exchanger for the hot...
I see the same with "Indoor Temperature" and "Target Indoor Temperature" when you are on external thermostat.
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Electrification and Independent Hot Water Systems Request for Knowledge
*CORRECTION* Epv210 is what I should have written. Apol...
By Toodles , 3 hours ago
-
RE: Air to air bus grant installer anywhere
That’s very disappointment. Like nobody bothered to eve...
By Adrian , 4 hours ago
-
Can DNO change a G99 export allowance once approved?
I have a Solar/battery system with an approved G99 expo...
By AndrewJ , 8 hours ago
-
RE: Electricity price predictions
Chinese manufacturing has the ability to be very good q...
By Majordennisbloodnok , 12 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Forum Handle: GotGordon Manufacturer: Samsun...
By Gotgordon , 23 hours ago
-
RE: Summer heat is becoming the new winter cold in the UK. What are you doing about it?
@ian33a I am not easy with sleep either unfortunately…....
By MK4 , 1 day ago
-
RE: Renewables uptake near you
In a village of under 40 houses...Conservation Area. I'...
By Tim441 , 1 day ago
-
RE: Home Alone with Home Assistant (previously A Beginner's Guide to ASHP Monitoring)
Great news, @bontwoody.
By Majordennisbloodnok , 2 days ago
-
Haier R290 Super Aqua Monobloc. Output capacity tables.
As I mentioned in my introduction post, I've been consi...
By Singlespeed , 2 days ago
-
RE: What is possible with FIT, SEG, Hate Pumps and Batteries?
Thank you, everyone, for your replies. Our FIT provid...
By ian33a , 2 days ago
-
@mk4 And of course, the panels are less productive due ...
By Toodles , 2 days ago
-
RE: GivEnergy inverter tripping due to over-voltage?
I'm trying to get clarity on exactly when the inverter ...
By Tim441 , 2 days ago
-
RE: Samsung Heat Pump – Can't Activate TW2 Pipe Sensor (for Delta T Control)
Autocorrupt seems to be working overtime.
By Majordennisbloodnok , 3 days ago
-
RE: Vehicle-to-Home with a Heat Pump: Is the Technology Ready and Which EV Should I Buy?
I looked into that wallbox a bit more off the back of t...
By Majordennisbloodnok , 3 days ago
SPONSORS
