Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jun 24, 2026
@toodles Glad to hear things are progressing well for you. I opted for Triple Glazing, they are Argon filled 4-12-4-12-4 Clear Softcoat Triple B...
I lowered the temp to 60 (the lowest it will go) for today's cycle. It got to 58 in the expected amount of time, then the element went off and came on...
I have an ASHP, solar and (only) 5.2kWh of battery storage. Last year I was on Cosy when it came out, then switched to Flux, then back to Cosy in Autu...
@transparent Oh right, I'll get all of that insulated as well. They actually left quite a lot in the rubbish pile, which I kept. Out of interest, all ...
Thank you @toodles , I ordered a temperature probe with two clamps and it's taken a while to arrive, I just need some time when the kids are out now s...
@transparent Below the Tundish the pipe goes to the exterior, the 2nd pic shows what is above. They were a bit miserly with insulation, I h...
@transparent It looks like the element is set to it’s maximum. Pretty sure that the grey wire halfway up the tank is a temp sensor right?
@transparent I can see my DHW tank temperature in the MELCloud app, hence why I thought that it would 'know'.
I didn't know that this is the way that it would work, I assumed that the Ecodan would be reading the temperature of the DHW tank and adjust according...
I managed to partially keep an eye on mine today for it's cycle (200L tank btw); 13:27 Tank temp 49.5°C ASHP goes off 3kW load in addition to...
@richard24738 My next L cycle is tomorrow conveniently, I'll try to keep an eye on it to see what it does.
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
My guess is that if you do nothing, Octopus will contin...
By Old_Scientist , 42 minutes ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s I would encourage you to have a conversation ...
By Rob of York , 48 minutes ago
-
RE: Is it the house or the equipment?
Thanks @jamespa The last hard to fix draughts in the...
By springswood , 2 hours ago
-
RE: Missing flow temperature in Heat Geek proposal
I suspect it's a deliberate decisi...
By JamesPa , 4 hours ago
-
RE: Vaillant Arotherm – Using Heating
@l8again Mine is typically using 11w including the i...
By Batpred , 4 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you have a flowmeter and two temperature probes, the...
By bobflux , 13 hours ago
-
RE: Siting of the external sensor on a heatpump
@jamespa Absolutely. Even if the same mistake was mad...
By Batpred , 20 hours ago
-
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
In fairness all heating has cost a lot to run in recent...
By JamesPa , 2 days ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 3 days ago
-
No, but the heat pump must be capable of delivering a S...
By JamesPa , 3 days ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 4 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 4 days ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
booked it with Vaillant. will use them until i can find...
By AdamK , 4 days ago
SPONSORS
