Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 5, 2026
Can you elaborate on that comment please? Does that Fogstar battery require communication with an inverter in order to 'work'?And, if so, then to wh...
Have you read the footer below every post from Mars?
A picture speaks a thousand words...
It's most likely Kelvin. He's got more degrees.
Part-L Section-9 provides a list of what to expect Only the installer could generate this main instruction manual. Note 9.2b where the instructi...
I'd strongly recommend that you use email when communicating with Samsung... You get to retain a copy of whatever was 'said' with a date/time stam...
I'd like to add to what @editor has already replied to this. You need to avoid the heat-pump cycling on/off.Using the compressor to bring the transf...
@david999 - Firstly, please note that the responses you are getting in this forum topic about your installation can be used as evidence in any dispute...
As you're an engineer, you'll probably want to devise a way of holding down the centre of those panels until your installer arrives next week. 'Ere ...
Here's a photo of a single PV-panel, wall-mounted. Firstly, note the spacing of the horizontal rails behind the panel. Secondly, you'll realise ...
@david999 have a look at the Fastensol manual I linked earlier. Note that there are two types of panel clamp end-clamp mid-clamp The la...
No, that's not correct @david999 The mounting bars shouldn't be placed along the top & bottom of the PV panels, but inset so that the clamps are...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: PV and battery long payback - sense check query
@davidb, it would be helpful if we had some ballpark id...
By Majordennisbloodnok , 1 hour ago
-
RE: Can I start an argument about buffer tanks please? 🙂
Assume flow from the heat source is higher than flow to...
By bobflux , 2 hours ago
-
RE: Indevolt Batteries UK Support & Info Thread
Thanks for that. BTW I'd be happy to test one for you...
By BlizzardGreen , 5 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Forum Handle: adrian Manufacturer: Appliandirect.co....
By Adrian , 5 hours ago
-
RE: Acond heat pump failed after four years - diagnostic quote £940 plus VAT
@downfield Thank you Downfield. This sounds potenti...
By Mia , 18 hours ago
-
RE: Digest of UK Energy Statistics
@jeff Yes my brother in Oz told me of that charge year...
By Jancold , 18 hours ago
-
RE: Love veg, hate watering cans
My dear daughter came for a bath and was given clear (I...
By Jancold , 18 hours ago
-
RE: Questions about A2A for heating as well as cooling
@ashp-bobba ah that's good to know, I'll get in contact...
By donciccio , 21 hours ago
-
RE: Aircon - in listed buildings
@etchedpixels thanks for giving such a full and helpful...
By GrahamF , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@old_scientist The service engineer powered down the ex...
By Papahuhu , 2 days ago
-
RE: Issue with Samsung Cascade System
@jamespa It's a funny system, but was out only option l...
By Renewables345 , 2 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Thanks, I like the chart, very helpful and this will de...
By baroquebank , 3 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
Production resumed to normal once the issue ...
By MK4 , 3 days ago
SPONSORS
