Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 10, 2026
I had suspected that might be the case. I've just notified my County Councillor about the risks of legionella with the lower temperatures which occu...
That's because I don't yet have a heat pump @kena 😉 ... and when I do get one, it won't be fitted by an MCS-accredited installer. I'll b...
It is unfortunate that D Trump doesn't take advantage of discussion forums such as this one to allow such notions to be subjected to 'peer review'! ...
I attended a National Grid Community Energy workshop last week.The organisers (Regen) held a brainstorming session which resulted in a document to be ...
Oh, wonderful! So ECO4 is another MCS approved scheme which deviates from good science.Why am I not surprised? 🤔 Sort of... it's a...
Perhaps I should also observe that bacteria can be eradicated by UV-C 'light', but I've not heard of that approach being used against Legionella. UV...
I'm jumping back in to the starter for this topic, because I'd appreciate some clarification... 1: What's the max output of those 8 PV panels? 2: ...
If you're contemplating changing any pumps, please first re-read what @mike-h posted further up this page. This might be the opportunity to change t...
May I throw in two other factors? 1. Biology: The bacteria have to come from somewhere in the first place. Historically the culprit was a header...
Hi @old_scientist and thanks for the specs.When was the heat pump installation completed? Two things I'd like to pick up if I may: 1: As you have ...
A 3-phase 17kW GSHP still sounds on the large side to me.We don't know your SAP calculations, but I'm a little surprised that a new-build home with UF...
I will agree that there have been other software issues with Kraken, which is the 'internal' name for the billing system used by Octopus, and licensed...
- 27 Forums
- 2,764 Topics
- 65.1 K Posts
- 2,313 Online
- 7,169 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Siting of the external sensor on a heatpump
I think not but have now added the cloud coverage weath...
By Batpred , 6 hours ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
@judith Thanks very much for this! My room by room calc...
By jon , 10 hours ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
I think that is outrageous even if I suspect not unique...
By Batpred , 11 hours ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 15 hours ago
-
RE: Vaillant Aurotherm - Heater Wire Position
Ah, good point. I need to check if this was installed i...
By Batpred , 20 hours ago
-
RE: Adventures in heat loss calculations
Posted by: @jamespa At this point its probably worth...
By Rob of York , 22 hours ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 1 day ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 2 days ago
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay @jamespa I've managed to get some nice re...
By Rob of York , 3 days ago
-
RE: 7kW EV Charger Options Advice
Doh, not sure that I was thinking straight there, less ...
By Rusty , 3 days ago
-
Thank you @trebor12345
By rgabor , 3 days ago
-
Panasonic Free Multi Z and Etherea Internal units.
My prospective installers have suggested the Panasonic ...
By Toodles , 3 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Great. You just need to find a way of cranking up your...
By JamesPa , 4 days ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
We had two heat pumps installed without Govt funding. H...
By Rob of York , 4 days ago



