Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 10, 2026
Kensa is a high quality British company and very approachable.I have visited their site at the far end of Cornwall and it's impressive. I believe th...
The external heat network would be beneath ground level. You'd replace the boiler with a heat-exchanger unit.It uses the existing pipework to radiat...
I don't think I should expand much on that in this open forum discussion. Let's say it was a Security issue; I was asking about a technical network ...
Yes @judith is right that you will in any case need to be using fuses and trips for the various connections to your inverter(s). Fortuitously this i...
I hear what you're saying @abernyte and the independence of NESO hasn't yet been tested, and may not be until the RESPs are in place at the end of nex...
I'm assuming that we're now discussing the SunSynk inverters and the diagrams I posted on the previous page here. The Loads that are connected to th...
Government shouldn't be involved at all in the future development of our energy supply systems. The Energy Act (Nov'23) made provision for energy pl...
It couldn't unless the UK Government was able to persuade HP manufacturers to allow digital access to their control electronics...effectively opening ...
That's a similar approach to the Demand Side Response (DSR) proposals from DESNZ in their consultation on Delivering a Safe and Secure Electricity Sys...
Detectives assigned to the Bury Head case have widened the search and discovered limbs being offered for sale by an online auction house."Whilst his f...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Siting of the external sensor on a heatpump
Is the sensor exposed to direct sunlight in the morning...
By bobflux , 41 minutes ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
@judith Thanks very much for this! My room by room calc...
By jon , 4 hours ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
I think that is outrageous even if I suspect not unique...
By Batpred , 4 hours ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 8 hours ago
-
RE: Vaillant Aurotherm - Heater Wire Position
Ah, good point. I need to check if this was installed i...
By Batpred , 13 hours ago
-
RE: Adventures in heat loss calculations
Posted by: @jamespa At this point its probably worth...
By Rob of York , 15 hours ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 1 day ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 1 day ago
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay @jamespa I've managed to get some nice re...
By Rob of York , 2 days ago
-
RE: 7kW EV Charger Options Advice
Doh, not sure that I was thinking straight there, less ...
By Rusty , 2 days ago
-
Thank you @trebor12345
By rgabor , 3 days ago
-
Panasonic Free Multi Z and Etherea Internal units.
My prospective installers have suggested the Panasonic ...
By Toodles , 3 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Great. You just need to find a way of cranking up your...
By JamesPa , 3 days ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
We had two heat pumps installed without Govt funding. H...
By Rob of York , 3 days ago
SPONSORS
