Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 1, 2026
Ah... I didn't get the sense of proportion from the photo! Rough rule of thumb for mass of tank is 1Kg per litre of water...... but that stated capa...
Highlights which might be significant here are: There is to be a new All-in-One inverter/battery combo, which is yet un-named.The battery capacity i...
This is what I can see in the attic: All of these brass fittings need insulation. Even for a tank within the thermal envelope of the house, you ...
There are no 'regulations' as such @sandy ... expect the rules of physics, which basically come down to common sense. Personally I wouldn't be happ...
Sadly @johnr the chlorination of our water supplies isn't adequate to eradicate legionella. Read also what I wrote in another topic about the Crypto...
Between us here on the Forum, I suspect we have enough knowledge to help anyone who finds themselves with Puredrive batteries which are no longer manu...
Sheesh! Ash him/her how many sites they have to visit to implement the firmware change.... and why they couldn't devise a system to do this remotely. ...
Is that upgrade applied automatically over-the-air to all Samsung units? Or does it require the householder or installer to do something?
@potatoman - follow what @ashp-bobba is describing to @netdonkey over on this other topic. He's addressing a very similar issue!
Do all ASHPs have that Primary Pump inside the building? Or is it sometimes within the external heat-pump / heat-exchanger unit itself?
@ashp-bobba - any chance of a diagram please? Pencil on the back of an envelope will do!
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
@old_scientist Thanks, yes, that was my recollection...
By Papahuhu , 8 hours ago
-
RE: Love veg, hate watering cans
Oh, I’m convinced about using grey water but not for ve...
By Majordennisbloodnok , 9 hours ago
-
RE: Digest of UK Energy Statistics
That sounds painful. It would be much better to charg...
By Transparent , 11 hours ago
-
Hole diameter is small but hole length is also very sma...
By bobflux , 12 hours ago
-
RE: Are Wind Turbines Really “Losers”?
We were sailing near a wind farm in the North Sea last ...
By Jeff , 12 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@papahuhu I think that accessibility issues go in waves...
By Toodles , 16 hours ago
-
@trebor12345 The idea is to ensure that Powerwall knows...
By Toodles , 16 hours ago
-
RE: Aircon - in listed buildings
We took a different approach. All our heating and cooli...
By EtchedPixels , 18 hours ago
-
RE: Indevolt Batteries UK Support & Info Thread
'hard limited' could be in 'admin' password protected s...
By JamesPa , 2 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Thanks. I do both, depending on purpose. For a quick po...
By cathodeRay , 2 days ago
-
RE: Missing flow temperature in Heat Geek proposal
@batpred That makes sense! Thanks for the information.
By sttpd1917 , 2 days ago
-
And we're back to @editor's point about supplier depend...
By Majordennisbloodnok , 2 days ago
-
RE: Cleaning solar panels with a hosepipe
This is one reason I'd never make a good solicitor. I'm...
By Majordennisbloodnok , 3 days ago
SPONSORS
